I hate upgrades, as always something goes wrong (ofcourse other things might have been wrong previously, hence the need for upgrade)

This time WOL stopped working in both 6.44.3 & current 6.45.3
It used to work perfectly fine in my old 6.34.x version

I can use Depicus WOL GUI tool (and with setting Send options: Internet my machines wakes up after packet is sent to 192.168.88.255 - but with Sent options: Local Subnet it also does not work, I assume /tool wol also uses local subnet, hence the issue)

So this does NOT work in current MikroTik RouterOS 6.45.3 (c) 1999-2019

/tool wol interface=ether2-master mac=A0:48:1E:B8:8D:58

Any ideas how to fix it?

sebus

:put [/ip arp get [f where mac-address=A0:48:1E:B8:8D:58] interface]

Code: Select all

:put [/ip arp get [f where mac-address=A0:48:1E:B8:8D:58] interface]

Code: Select all

:put [/ip arp get [f where mac-address=A0:48:1E:B8:8D:58] interface]

This may not work. On hEX routers, it will just show name of the bridge where the interface is connected, not the physical interface.

Interface is Bridge1 for all innside mac on hEX

Code: Select all

/ip arp print
 0 DC 10.10.10.41     00:1A:EC:0C:1C:83 Bridge1
 1 DC 10.10.10.32     90:BA:1A:68:DA:D1 Bridge1
...
...