hi ,
can anyone tell me IN WDS what is diff. between static and dynamic.
it will affect on performance or not?
-
-
Adam McLaughlin
Member Candidate
- Posts: 149
- Joined:
- Location: Santa Rosa, California
- Contact:
it's obvious really ...
static:
+ you can control what devices you want to be in the WDS setup
+ you don't have the IP address problem (see dynamic)
- you have to add a lot of devices by hand
dynamic:
+ created "on the fly" and saves time
+ very easy to configure
- less control over the setup
- if the wireless link goes down, the IP address drops off the dynamic interface
http://www.mikrotik.com/testdocs/ros/2. ... hp#4.13.10
static:
+ you can control what devices you want to be in the WDS setup
+ you don't have the IP address problem (see dynamic)
- you have to add a lot of devices by hand
dynamic:
+ created "on the fly" and saves time
+ very easy to configure
- less control over the setup
- if the wireless link goes down, the IP address drops off the dynamic interface
http://www.mikrotik.com/testdocs/ros/2. ... hp#4.13.10
Re: wds?
hi normis
i m stucked at one point i hope some one will help me.
i m connecting 2 AP using WDS static.its working fine.i have one question
is it possible to connect client (station mode) to AP or not?if it possible then how can i connect?
i m trying to connect like this: but i can't
AP----->wireless interface------>access list----->MAC add of client(station mode)
plz plz some one help me .
thanx in advance.
i m stucked at one point i hope some one will help me.
i m connecting 2 AP using WDS static.its working fine.i have one question
is it possible to connect client (station mode) to AP or not?if it possible then how can i connect?
i m trying to connect like this: but i can't
AP----->wireless interface------>access list----->MAC add of client(station mode)
plz plz some one help me .
thanx in advance.
Re: wds?
----
Yup..
here i used ap2ap than set station on 'access-list' is working
simple mean i have divices on 'access-list' when it as station and 'connect-list' as static-wds will connect to my roam. .... nice
regards
Hasbullah.com
----
Yup..
here i used ap2ap than set station on 'access-list' is working
simple mean i have divices on 'access-list' when it as station and 'connect-list' as static-wds will connect to my roam. .... nice
regards
Hasbullah.com
----
hi normis
i m stucked at one point i hope some one will help me.
i m connecting 2 AP using WDS static.its working fine.i have one question
is it possible to connect client (station mode) to AP or not?if it possible then how can i connect?
i m trying to connect like this: but i can't
AP----->wireless interface------>access list----->MAC add of client(station mode)
plz plz some one help me .
thanx in advance.
Who is online
Users browsing this forum: No registered users and 8 guests