Dear Sirs,
I've tried to turn off the LEDs on this routerboard, without success.
If I set as ALL LED OFF IMMEDIATE return the could'nt change led settings erro.
I don't want any LED ON.
Is there something special to do to make this work?
Thanks, BR
/system leds> print
Flags: X - disabled, * - default
# TYPE INTERFACE LEDS
0 * off user-led
user-led
1 off
RB951G-2HnD can't turn OFF LED
You do not have the required permissions to view the files attached to this post.
Re: RB951G-2HnD can't turn OFF LED
It's a good question, and one I've been meaning to ask as well.
Also, why is there a difference between the 951G and the 951Ui in terms of LED capability, given these are otherwise so similar?
On the 951Ui:
On the 951G:
Why can't I control the ethernet port LEDs on the 951G?
Also, why is there a difference between the 951G and the 951Ui in terms of LED capability, given these are otherwise so similar?
On the 951Ui:
Code: Select all
# may/01/2017 10:45:17 by RouterOS 6.38.5
# software id = XXXX-XXXX
#
/system leds
set 0 disabled=no interface=ether1-master-lan leds=led1 type=interface-status
set 1 disabled=no interface=ether2-slave-lan leds=led2 type=interface-status
set 2 disabled=no interface=ether3-slave-lan leds=led3 type=interface-status
set 3 disabled=no interface=ether4-slave-lan leds=led4 type=interface-status
set 4 disabled=no interface=ether5-slave-lan leds=led5 type=interface-status
set 5 disabled=no interface=wlan1 leds=wlan-led type=interface-status
/system leds setting
set all-leds-off=never
Code: Select all
# may/01/2017 10:48:32 by RouterOS 6.38.5
# software id = XXXX-XXXX
#
/system leds
set 0 disabled=no interface=wlan1 leds=wlan-led type=wireless-status
/system leds setting
set all-leds-off=never
Re: RB951G-2HnD can't turn OFF LED
What a nice surprise with the update, I can't believe you can turn off by software the LED of a rasbperry pi and not those of the routerboar.
Black tape, will solve the problem?
Black tape, will solve the problem?
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: collateral, Salidad and 57 guests