Question about firewall.
Here is pic. Right side, from top to bottom.
1. Ping from 192.168.56.10 to 192.168.56.22
2. Ping from 192.168.56.23 to 192.168.56.22
3. Ping from 192.168.56.10 to wireless 192.168.56.64
4. Ping from 192.168.56.23 to wireless 192.168.56.64
-Top left Pic, connection filter protocol = icmp
Only ping #2 is showed. Why no ping #1 #3 #4 connection showed?
Miss icmp connection...
You do not have the required permissions to view the files attached to this post.
-
-
CZFan
Forum Guru
- Posts: 2098
- Joined:
- Location: South Africa, Krugersdorp (Home town of Brad Binder)
- Contact:
Re: Miss icmp connection...
Probably depends on your topology, i.e. Some IPs is going via bridge / switch and CPU never sees them
Provide network diagram and device config for more assistance
Provide network diagram and device config for more assistance
Re: Miss icmp connection...
CZFan, I appreciate attention you gave for topic and thank you for suggestion! I think this is it. I will try to separate devices for few subnets and try again.Some IPs is going via bridge / switch and CPU never sees them