Community discussions

MikroTik App
 
amsco
just joined
Topic Author
Posts: 9
Joined: Fri Dec 10, 2004 7:44 pm

Only Getting 6Mbps on 5Ghz

Fri Feb 18, 2005 10:56 am

i have two radios on mikrotik routerbord 200, with minipici but ic ant seem to get it to do more than 6Mbps half duplex. Can someone please help, i need to do at least 10Mbps or better still 20Mbps. Antenna is 30Dbi and distance is 2Km.

Thanks

amsco
 
User avatar
stephenpatrick
Forum Veteran
Forum Veteran
Posts: 702
Joined: Fri Aug 20, 2004 12:26 pm
Location: UK
Contact:

Fri Feb 18, 2005 11:10 am

Signal levels?
Exact Freq you are using?
Nstreme enabled or not?
WEP enabled (that slows it down)?
WDS or routed connection?

Regards
 
amsco
just joined
Topic Author
Posts: 9
Joined: Fri Dec 10, 2004 7:44 pm

Fri Feb 18, 2005 11:32 am

Hi Stepen, Signal level is good -58, 5.2Ghz frequency, i have tried both nstreme enabled and disabled but still the same, and it is an EoIP tunnel giving a complete bridge. Hope this helps?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26931
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Fri Feb 18, 2005 11:45 am

eoip slows it down a lot. try WDS instead (in the manual, look in the how to section)
 
amsco
just joined
Topic Author
Posts: 9
Joined: Fri Dec 10, 2004 7:44 pm

Fri Feb 18, 2005 12:24 pm

hi Normus, can i add the lan interface to the bridge to create just one network?

thanks amsco
 
amsco
just joined
Topic Author
Posts: 9
Joined: Fri Dec 10, 2004 7:44 pm

Fri Feb 18, 2005 2:38 pm

thanks normis, WDS plus bridging the LAN interface gave me a beautiful bridge and the thoroughput is good.

amsco
 
Eko Budhi Harsono
just joined
Posts: 10
Joined: Mon Jan 03, 2005 5:16 pm

Fri Feb 25, 2005 8:00 pm

How much throughput you can get with wds & bridging ? I have the same problem using eoip.

Thanks