Code: Select all
:put [/ip address get value-name=address [find interface=ether1]]Any ideas as to what changed??
get interface address not working in v6.48.2
In v6.48.2 scripting the below returns "no such item"
Was working on 6.48.1 and older.
Any ideas as to what changed??
Any ideas as to what changed??
Re: get interface address not working in v6.48.2
do not accept "strange" syntax?
Code: Select all
:put [/ip address get [find where interface=ether1] address]
Re: get interface address not working in v6.48.2
"no such item" -> /ip address print where interface=ether1 returns nothingIn v6.48.2 scripting the below returns "no such item"Was working on 6.48.1 and older.Code: Select all:put [/ip address get value-name=address [find interface=ether1]]
Any ideas as to what changed??
"invalid internal item number" -> /ip address print where interface=ether1 returns more than one address
Re: get interface address not working in v6.48.2
"no such item" -> /ip address print where interface=ether1 returns nothing
"invalid internal item number" -> /ip address print where interface=ether1 returns more than one address
???
"invalid internal item number" -> /ip address print where interface=ether1 returns more than one address
???
Re: get interface address not working in v6.48.2
AH... understand what you try to write:
if interface has no IP assigned return "no such item",
if interface has multiple IP return "invalid internal item number",
if have exactly one IP, return the IP.
Code: Select all
:put [/ip address get [find where interface=ether1] address]if interface has multiple IP return "invalid internal item number",
if have exactly one IP, return the IP.
Last edited by rextended on Wed Apr 21, 2021 4:52 pm, edited 1 time in total.
Re: get interface address not working in v6.48.2
For see if ether1 have any IP, first to all you must check if ether1 is part of some bridge, and then retrieve the IP of the bridge.
Re: get interface address not working in v6.48.2
for retrieve all IP on ether1 interface without error: (0 IP=empty array; 1 IP=array with 1 IP, more IP = array of IP)
this not consider IP eventually assigned at the bridge, if ether1 is on bridge
Code: Select all
:foreach k in=[/ip address find where interface=ether1] do={:put [/ip address get $k address]}
this not consider IP eventually assigned at the bridge, if ether1 is on bridge
Code: Select all
:foreach k in=[/int bri port find where interface=ether1] do={:put [/int bri port get $k bridge]}
Re: get interface address not working in v6.48.2
@nostromog
With some further digging, the error was indeed "invalid internal item number" and not "no such item", there were 2 IP's on the same interface.
@rextended
Thank you, will incorporate it into my script, problem solved!
With some further digging, the error was indeed "invalid internal item number" and not "no such item", there were 2 IP's on the same interface.
@rextended
Thank you, will incorporate it into my script, problem solved!
Who is online
Users browsing this forum: howdey57 and 22 guests