Hello,

so I have created a queue list to limit the guest network DL/UP speed.

However, numbers like 10M or even 1M resulted in speedtest.net results at my max speed (around 35 Mbps).

It only does something when I set Target to my guest bridge called "bridge-guest", or the address range it uses (192.168.99.0/24)
In the first case (target bridge) setting Max Limit to 128k, gives me 6-7 Mbps on the Speedtest.
In the second case (target 192.168.99.0/24) setting Max Limit to 64k, gives me 6-7 Mbps on the Speedtest.

My question is, isn't this weird? I would expect less than 8 Mbps speedtest from 64k limit :-D

Also attaching my configs.
[*]HAP-AC2 is main router
[*]HAP-Lite is for wifi extension and connecting my PC via cable

Thank you for any advice!

Bump

You need to disable fast-track found in IP>Firewall>Filter or at least exclude your guest-lan from it.

You need to disable fast-track found in IP>Firewall>Filter or at least exclude your guest-lan from it.

hello good man, thank you for your advice.

are there any negatives in doing so?