There is a task to switch to mikrotik from the old cisco.
It will be CCR1016-12g. After it, first the old switches (vlans are able, they are already registered), followed by replacement with CRS354.
How to correctly configure many vlans and dhcp on one ccr1016 port?
Each vlan has its own dedicated range of ip addresses and each should have its own dhcp settings, which ccr1016 will do - its own dhcp range, gateway.
There are not enough ports in ccr1016 for all vlans, crs354, it seems to me, is worse suited for this task.
I came across on the forums that it is necessary to do vlan on bridge interfaces, but I want to find more detailed information, if there is an article with a similar topic - write the link