Is there somehwere on this site a guide on how to set this up?
I search all around but all i find are people talking about it but no real examples/instructions.
Somebody want to point me in the right direction?
Re: Nstream dual?
Come on folks, there's plenty of people on here running this so where's the guides at?
I thought it was pretty self explanatory but it sure ain't working so I must be over looking something.
I thought it was pretty self explanatory but it sure ain't working so I must be over looking something.
Re: Nstream dual?
Have you checked the RouterOS documentation? They have an application example of nstreme dual here http://www.mikrotik.com/testdocs/ros/2. ... reless.php
Re: Nstream dual?
yes, joie,
mikrotik documentation contains much more you need to set it up.
mikrotik documentation contains much more you need to set it up.
Re: Nstream dual?
Thank you, I knew it was in there but everytime I searched for it it came back "no results".
Must have not been holding my mouth right when I did the search.
Must have not been holding my mouth right when I did the search.
Re: Nstream dual?
Ok, so I think have it set-up like the example but it's not working, so I guess maybe I am over looking something.
It's Monday morning and it's one of them days so here's my config incase I am overlooking something in the settings.
First Radio;
Second Radio;
It's Monday morning and it's one of them days so here's my config incase I am overlooking something in the settings.
First Radio;
Code: Select all
[admin@NS-1] interface wireless> print
Flags: X - disabled, R - running
0 name="wlan-Bottom-RX" mtu=1500 mac-address=00:0C:42:18:AB:8F arp=enabled
disable-running-check=no interface-type=Atheros AR5413
radio-name="NS-RX" mode=nstreme-dual-slave ssid="NS"
area="" frequency-mode=manual-txpower country=no_country_set
antenna-gain=0 frequency=5180 band=5ghz scan-list=default
rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007
ack-timeout=dynamic tx-power-mode=default noise-floor-threshold=default
periodic-calibration=default periodic-calibration-interval=60
burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled
wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150
wds-ignore-ssid=no update-stats-interval=disabled
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 proprietary-extensions=post-2.9.25
hide-ssid=no security-profile=default disconnect-timeout=3s
on-fail-retry-time=100ms hw-retries=15 preamble-mode=both
compression=no allow-sharedkey=no
1 name="wlan-Top-TX" mtu=1500 mac-address=00:0C:42:18:B9:C3 arp=enabled
disable-running-check=no interface-type=Atheros AR5413
radio-name="NS-TX" mode=nstreme-dual-slave ssid="NS"
area="" frequency-mode=manual-txpower country=no_country_set
antenna-gain=0 frequency=5825 band=5ghz scan-list=default
rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007
ack-timeout=dynamic tx-power-mode=default noise-floor-threshold=default
periodic-calibration=default periodic-calibration-interval=60
burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled
wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150
wds-ignore-ssid=no update-stats-interval=disabled
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 proprietary-extensions=post-2.9.25
hide-ssid=no security-profile=default disconnect-timeout=3s
on-fail-retry-time=100ms hw-retries=15 preamble-mode=both
compression=no allow-sharedkey=no
[admin@NS-1] interface wireless> nstreme-dual
<reme-dual> print
Flags: X - disabled, R - running
0 R name="nstreme-1" mtu=1500 mac-address=00:0C:42:18:AB:8F arp=enabled
disable-running-check=no tx-radio=wlan-Top-TX rx-radio=wlan-Bottom-RX
remote-mac=00:0C:42:18:AC:20 tx-band=5ghz tx-frequency=5180
rx-band=5ghz rx-frequency=5825 rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
framer-policy=exact-size framer-limit=4000
Code: Select all
[admin@NS-2] interface wireless> print
Flags: X - disabled, R - running
0 name="wlan-Bottom-RX" mtu=1500 mac-address=00:0C:42:18:AC:20 arp=enabled
disable-running-check=no interface-type=Atheros AR5413
radio-name="NS-RX" mode=nstreme-dual-slave ssid="NS"
area="" frequency-mode=manual-txpower country=no_country_set
antenna-gain=0 frequency=5825 band=5ghz scan-list=default
rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,
54Mbps
basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007
ack-timeout=dynamic tx-power-mode=default noise-floor-threshold=default
periodic-calibration=default periodic-calibration-interval=60
burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled
wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150
wds-ignore-ssid=no update-stats-interval=disabled
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 proprietary-extensions=post-2.9.25
hide-ssid=no security-profile=default disconnect-timeout=3s
on-fail-retry-time=100ms hw-retries=15 preamble-mode=both
compression=no allow-sharedkey=no
1 name="wlan-Top-TX" mtu=1500 mac-address=00:0C:42:18:AB:0F arp=enabled
disable-running-check=no interface-type=Atheros AR5413
radio-name="NS-TX" mode=nstreme-dual-slave ssid="NS"
area="" frequency-mode=manual-txpower country=no_country_set
antenna-gain=0 frequency=5180 band=5ghz scan-list=default
rate-set=default supported-rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
supported-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
basic-rates-b=1Mbps basic-rates-a/g=6Mbps max-station-count=2007
ack-timeout=dynamic tx-power-mode=default noise-floor-threshold=default
periodic-calibration=default periodic-calibration-interval=60
burst-time=disabled dfs-mode=none antenna-mode=ant-a wds-mode=disabled
wds-default-bridge=none wds-default-cost=100 wds-cost-range=50-150
wds-ignore-ssid=no update-stats-interval=disabled
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 proprietary-extensions=post-2.9.25
hide-ssid=no security-profile=default disconnect-timeout=3s
on-fail-retry-time=100ms hw-retries=15 preamble-mode=both
compression=no allow-sharedkey=no
[admin@NS-2] interface wireless> nstreme-dual
<reme-dual> print
Flags: X - disabled, R - running
0 R name="nstreme-2" mtu=1500 mac-address=00:0C:42:18:AC:20 arp=enabled
disable-running-check=no tx-radio=wlan-Top-TX rx-radio=wlan-Bottom-RX
remote-mac=00:0C:42:18:AB:8F tx-band=5ghz tx-frequency=5180
rx-band=5ghz rx-frequency=5825 rates-b=1Mbps,2Mbps,5.5Mbps,11Mbps
rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
framer-policy=exact-size framer-limit=4000
Re: Nstream dual?
switch the frequencies of one unit and it should work (rx tx)
unit one RX needs to be unit two TX
steven
unit one RX needs to be unit two TX
steven
Re: Nstream dual?
Yeah, I'm a bone-head, I knew that had to be reversed but I have no idea how I missed that.
Least I only spent a good hour overlooking the obvious.
Thanks mate.
Least I only spent a good hour overlooking the obvious.
Thanks mate.
Who is online
Users browsing this forum: cyrq and 31 guests