Dear all
I'm planning to change my cisco Switch SG300-28PP 28-Port Gigabit PoE+ Managed Switch to MikroTik Switch at least 26 port PoE+ but with seam cisco specs because all Wi-Fi AP, phone,PBX and security cameras work with PoE+
any recommendation from you
With Regards
-
-
toxicfusion
Member
- Posts: 326
- Joined:
Re: change from cisco to mikrotik
Dont do it. Unless you really want to.
Re: change from cisco to mikrotik
thanks toxicfusion for your reply
the reason that i want to change cisco because i cut off the power from cisco during update process and now it’s not working anymore this way and the dealer can’t repair it
with regards
the reason that i want to change cisco because i cut off the power from cisco during update process and now it’s not working anymore this way and the dealer can’t repair it
with regards
Re: change from cisco to mikrotik
Check here https://mikrotik.com/products/group/switches
Take a look at the CRS3xx series switches ...
Take a look at the CRS3xx series switches ...
Re: change from cisco to mikrotik
i cut off the power from cisco during update process and now it’s not working anymore this way
Have you tried with NetInstall?
Sorry...
-
-
ConnyMercier
Forum Veteran
- Posts: 769
- Joined:
Re: change from cisco to mikrotik
I am sorry too!
Check out the Mikrotik CRS328-24P-4S+RM
Bang for the buck the best Switch ever!
Re: change from cisco to mikrotik
If you need more then 24 poe-out ports in one device, then, currently, the only option is CRS354-48P-4S+2Q+RM
https://mikrotik.com/product/crs354_48p_4s_2q_rm
https://mikrotik.com/product/crs354_48p_4s_2q_rm
Re: change from cisco to mikrotik
thanks for all
but i don’t think to change from cisco to mikrotik switch because i have hEX PoE port 2 to 5 poe out and hEX S port 5 poe out but none of them are really providing poe out i’ve test the with ip phone and AP both of them are support poe and when i connect them none of them are working that means there is an issue with poe in mikrotik device so i plan to buy a new cisco device that really provide poe out for all 24 ports
best regards
but i don’t think to change from cisco to mikrotik switch because i have hEX PoE port 2 to 5 poe out and hEX S port 5 poe out but none of them are really providing poe out i’ve test the with ip phone and AP both of them are support poe and when i connect them none of them are working that means there is an issue with poe in mikrotik device so i plan to buy a new cisco device that really provide poe out for all 24 ports
best regards
-
-
StubArea51
Trainer
- Posts: 1742
- Joined:
- Location: stubarea51.net
- Contact:
Re: change from cisco to mikrotik
What do you mean with "..none of them are really providing poe out.."?thanks for all
but i don’t think to change from cisco to mikrotik switch because i have hEX PoE port 2 to 5 poe out and hEX S port 5 poe out but none of them are really providing poe out i’ve test the with ip phone and AP both of them are support poe and when i connect them none of them are working that means there is an issue with poe in mikrotik device so i plan to buy a new cisco device that really provide poe out for all 24 ports
best regards
What devices are you trying to power, what are their poe-in specification? What PSU are you using?
Please read the device specification before the purchase: The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
https://mikrotik.com/product/RB960PGS
If you are sure that you are using a proper setup and the hEX PoE might be defective, please, do not hesitate and write to support@mikrotik.com
Re: change from cisco to mikrotik
thanks ElansWhat do you mean with "..none of them are really providing poe out.."?thanks for all
but i don’t think to change from cisco to mikrotik switch because i have hEX PoE port 2 to 5 poe out and hEX S port 5 poe out but none of them are really providing poe out i’ve test the with ip phone and AP both of them are support poe and when i connect them none of them are working that means there is an issue with poe in mikrotik device so i plan to buy a new cisco device that really provide poe out for all 24 ports
best regards
What devices are you trying to power, what are their poe-in specification? What PSU are you using?
Please read the device specification before the purchase: The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
https://mikrotik.com/product/RB960PGS
If you are sure that you are using a proper setup and the hEX PoE might be defective, please, do not hesitate and write to support@mikrotik.com
this is it grandstream ip phone GVX3370
https://www.grandstream.com/hubfs/Produ ... ?hsLang=en
and the other device from greandstream GWN7610
https://www.grandstream.com/hubfs/Produ ... ?hsLang=en
i just want to use mikrotik devices hEx s and hEx PoE as a switch
i meant both of hEx s and hEx Po not really provide proper voltage
Re: change from cisco to mikrotik
You need to use 48V adapter, not standard 24V which is delivered with hex devices.