MikroTik smartphone app (ex Tik-App)

ErfanDL · Sat Feb 03, 2018 10:36 pm

Please add dark theme

Sent from my C6833 using Tapatalk

jimmyz · Wed Feb 21, 2018 12:48 pm

Someone please point me a place for a genuine latest version.

Chupaka · Wed Feb 21, 2018 1:56 pm

Someone please point me a place for a genuine latest version.

Here is it: https://play.google.com/apps/testing/co ... oid.tikapp

Wed Feb 21, 2018 1:57 pm

I am sorry to say, but I really do not like the Tikapp at all... It would be much nicer to have something that looks much more like winbox available for Android and iOS.

Current Tikapp is basically a Winbox copy. What else did you expect?

Chupaka · Wed Feb 21, 2018 2:09 pm

Current Tikapp is basically a Winbox copy. What else did you expect?

By the way, I cannot find current wifi interface frequency - it's on Status page of WinBox, and in TikApp, there's no 'Channel' line in Status tab.

katem07 · Wed Feb 21, 2018 2:23 pm

I'm using it for monitoring only , not for control
But new to me to know that Tik App is an official app and supported by Mikrotik

Tnxs Mr.Normis you did nice.

Wed Feb 21, 2018 4:08 pm

Current Tikapp is basically a Winbox copy. What else did you expect?
By the way, I cannot find current wifi interface frequency - it's on Status page of WinBox, and in TikApp, there's no 'Channel' line in Status tab.

how about
wlan1 > Wireless > Frequency
and also the Channel info in the Status tab

Chupaka · Wed Feb 21, 2018 6:49 pm

wlan1 > Wireless > Frequency

It's "auto"

and also the Channel info in the Status tab

as I said,

there's no 'Channel' line in Status tab.

Only Last Linu Up/Down Time and Link Downs

yhfung · Wed May 09, 2018 10:41 am

When I attented the MUM Japan 2018 yesterday via YouTube, one of your colleague mentioned that iOS Tik App is coming. Please advise when will the iOS one be available for use?

docmarius · Wed May 09, 2018 7:52 pm

...Please advise when will the iOS one be available for use?

You mean the Apple or the Cisco IOS?

msatter · Wed May 09, 2018 7:55 pm

Cisco sucks in making tablets.

mica · Sat May 26, 2018 5:30 am

When I attented the MUM Japan 2018 yesterday via YouTube, one of your colleague mentioned that iOS Tik App is coming. Please advise when will the iOS one be available for use?

+1 need tik app for ios devices

TheDon · Mon May 28, 2018 7:41 pm

When I attented the MUM Japan 2018 yesterday via YouTube, one of your colleague mentioned that iOS Tik App is coming. Please advise when will the iOS one be available for use?
+1 need tik app for ios devices

...and PLUS Another!

I've tried to use the web interface from an iPhone - and it is not great.

In a day and age of mobility and 'do it on your phone', iOS app would be welcomed!

skept2it · Wed May 30, 2018 12:13 pm

Hi

I like the android app (on phone and tablet), specially now with the color support for queues.
Possible improvements:
- Would be great if you could select your own "favorites" and add to home screen from what you want to look at quickly (like "queue tree" for example).
Or like sub pages from IP / firewall etc.
- Also on the first screen (CPU load etc.) show directly last critical issue the system logged ?

Would allow to be faster/more productive with the app

msatter · Thu Jun 07, 2018 12:17 pm

Thanks for the update to 0.68 and the TikAPP does now work again with the secure login.

ronniee · Mon Jun 18, 2018 2:14 pm

any news about IOS version?

shahbazian · Sun Jun 24, 2018 4:32 pm

TikApp stable version when?

Sent from my SM-G950F using Tapatalk

Chupaka · Mon Jun 25, 2018 11:35 am

Well, current version is quite stable. If it's unstable for you - please write to support@mikrotik.com with detailed description of your problem.

shahbazian · Mon Jun 25, 2018 12:40 pm

Well, current version is quite stable. If it's unstable for you - please write to support@mikrotik.com with detailed description of your problem.

There is no problem.
Just for google play store issue.

Sent from my SM-G950F using Tapatalk

Chupaka · Mon Jun 25, 2018 12:52 pm

What issue? You just need to click a button once

pietroscherer · Mon Jun 25, 2018 2:02 pm

any news about IOS version?

+1

jebz · Tue Jun 26, 2018 2:38 am

Possible improvements:
- Would be great if you could select your own "favorites" and add to home screen from what you want to look at quickly (like "queue tree" for example).
Or like sub pages from IP / firewall etc.
- Also on the first screen (CPU load etc.) show directly last critical issue the system logged ?

Would allow to be faster/more productive with the app

.
I like these suggested features.

ronniee · Tue Jun 26, 2018 7:19 am

any news about IOS version?
+1

and also a dude client for IOS/ipad ?

thebiggboss78 · Sat Aug 25, 2018 11:35 am

any news about IOS version?
+1
and also a dude client for IOS/ipad ?

Any updates on that iOS version? Official Tik-app for iPad would be a lifesaver!!

antispam · Thu Sep 06, 2018 11:49 am

some leaked photos of iOS version.

https://twitter.com/mikrotik_com/status ... 6277917696

Could this design be on android also?

https://imgur.com/a/xOQIUEa

Chupaka · Thu Sep 06, 2018 11:53 am

some leaked photos of iOS version.

And 6.43 version

Samar · Sat Sep 15, 2018 2:39 pm

Sveiki Normis.
Publicējiet caur "apple test flight"?
Hi Normis.
Publish on Apple TestFlight?
TikApp for iOS

ronniee · Tue Sep 18, 2018 10:24 am

alpha beta test option, for TikApp on IOS?
come on

antispam · Fri Sep 28, 2018 11:02 pm

Your prayers have been answered https://testflight.apple.com/join/wGEkmFU9

Sweet sound of routing

Samar · Sat Sep 29, 2018 2:03 pm

Your prayers have been answered https://testflight.apple.com/join/wGEkmFU9

Sweet sound of routing

It’s exelent! Thank you!

vortex · Tue Oct 02, 2018 6:08 pm

I need the latest apk.

Thanks

raffav · Fri Oct 05, 2018 7:46 pm

On IPad air 1 iOS 12 it crash when I open some mk device (all is using beta ros version)

Sent from my XT1580 using Tapatalk

raffav · Sat Oct 06, 2018 4:41 pm

Maybe is time to create a iOS thread
Also like the new page quick viewer
Hope to see this on android version too

Sent from my XT1580 using Tapatalk

nabilx · Sun Oct 14, 2018 3:33 am

When this awesome Main menu will come to the android version?

rushlife · Wed Oct 17, 2018 1:18 pm

I will be very disappointed if version for Apple iOS will be better then version for Android. I am a "little bit" for linux like (based) devices, not for Apple proprietary sh*ts.

Wed Oct 17, 2018 2:42 pm

Funny conflict in your sentence

You like it, but you don't want it.

nescafe2002 · Wed Oct 17, 2018 5:46 pm

Yeah, please stop development for iOS immediately because one user dislikes Apple..

saper2 · Sun Oct 21, 2018 4:42 pm

Yeah, please stop development for iOS immediately because one user dislikes Apple..

Sorry but it's already 2 users, I don't like bitten-apple too

DummyPLUG · Sun Oct 21, 2018 7:55 pm

Yeah, please stop development for iOS immediately because one user dislikes Apple..
Sorry but it's already 2 users, I don't like bitten-apple too

Make it 3, an Apple a day scare admin away.

filipelias · Tue Oct 30, 2018 1:18 am

Hi, I like the design overhaul a lot. I've noticed a few bugs. On the main screen after logging in, the app is prompting me to update to the latest version, but I have already the latest version. Here are a few screenshots:

raffav · Tue Oct 30, 2018 2:02 am

Hi, I like the design overhaul a lot. I've noticed a few bugs. On the main screen after logging in, the app is prompting me to update to the latest version, but I have already the latest version. Here are a few screenshots:

@filipelias Your Firmware(BootLOADER) need an update, not software(RouterOS)
I committed the same "bug" as you

Chupaka · Tue Oct 30, 2018 6:25 am

Yeah, the same confusion

It took me a dozen minutes to understand that it's not about RouterOS itself

P.S. In Advanced Settings, every submenu has duplicated items for me:

Screenshot_20181030-072432_MikroTik.jpg

nescafe2002 · Tue Oct 30, 2018 6:28 am

Comes with the phone. You also have double battery indicators and alarm clocks

erebusodora · Tue Oct 30, 2018 9:18 am

On Lenovo Vibe P1 is workin good but 1 problem found. When import adreses (from adress.wbx file) and when i want to connect to adres from imported list it always show my first conection . Example my first conection is 192.168.0.1 and i want to connect to 192.168.0.6 from imported list but always return 192.160.0.1 (firs connection)
Still no fixed on version 0.0.38

With new version bug is fixed. New version is NICE

Very NICE

Chupaka · Tue Oct 30, 2018 9:28 am

Is it only me, or CAPsMAN is completely missing in new app?..

ognjen · Tue Oct 30, 2018 5:08 pm

Is it only me, or CAPsMAN is completely missing in new app?..

I have CAPsMAN menu in TikApp, look below

Now version of TikApp is soooo good, ty mikrotik developers

Simono · Tue Oct 30, 2018 5:35 pm

New version could save settings topic display etc if I enable it.

Wysłane z mojego TA-1021 przy użyciu Tapatalka

Chupaka · Tue Oct 30, 2018 7:05 pm

Is it only me, or CAPsMAN is completely missing in new app?..
I have CAPsMAN menu in TikApp, look below

Thanks, clearing the cache from main screen returned it back. And reordered all the rest menu items

msatter · Tue Oct 30, 2018 7:28 pm

WOW....I am speechless, good that I can still type.

Looks great and blistering fast. For the firstime I could see the Addresslist in Firewall. It timed out but still I could see addresses.

Now don't have to start the computer to use Winbox and now I trust myself to do stuff from the tablet.

Many THANKS!!

pacmanfan · Wed Oct 31, 2018 4:49 pm

In the new iOS app I have some trouble with PPPoE.

1) In PPP Interface, if I select a dynamic PPPoE interface the interface stats never load and the Winbox connection complete stops working. I have to task kill and restart iOS Winbox to do anything else on the router, but I consistently cannot get dynamic PPPoE interfaces to load. See:

IMG_3954.PNG

2) Editing PPP Secrets, the Winbox connection sometimes locks up when loading the secret's data. This is inconsistent, and I can't reproduce this morning, so maybe was fixed in 0.20? Will update this if I notice more.
3) Option to remove items in PPP Active Connections is missing, like we have on desktop Winbox.

ErfanDL · Wed Oct 31, 2018 8:34 pm

Fix the master password bug

Sent from my C6833 using Tapatalk

ErfanDL · Thu Nov 01, 2018 10:29 am

please add the TX rate and RX rate in hotspot active menu

chm0d755 · Thu Nov 01, 2018 1:16 pm

Hello,

The application sometimes crashes when opening IP --> ARP when there are around 2000 static arp records. May be crashes in other long list of records (queues, firewall rules...)

For example, you can make the app to load parts arp records while scrolling down, but searching to work the entire list.

Can the main menus in android app be sorted as in winbox?

Thanks.

victorsoares · Mon Dec 03, 2018 2:30 pm

Hi, I just bought a new phone with the android one thing, a Xiaomi MI A2 Lite, running android 8.1.0, on my last phone the app was working great, but on this one I'm able to log in to any equipment except CCR's. It gets stuck on "Downloading plugins" and if I check the log it says that I successfully logged in and then logged out from tik app. Anyone else having this problem? I already tried clearing the cache and reinstalling the app, also checked all the permissions and allowed unrestricted access to internet on the app. Tried it from my home network and from LTE.

ivicask · Mon Dec 03, 2018 3:00 pm

I wonder is i possible to add some kinda of bandwidth test into this app?So i can quickly test actual wifi performance from router to my phone directly, it would be the most useful thing ever.

nemoforum · Wed Jan 16, 2019 11:08 pm

Mikrotik App (latest from Play Store, clean install) force close right after start on OnePlus 6T (latest stable firmware).

nemoforum · Thu Jan 17, 2019 11:48 pm

OnePlus 6T, Mikrotik App (latest)
Force close right after start:

01-17 23:13:39.415   906  2950 I ActivityManager: START u0 {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.mikrotik.android.tikapp/.activities.MainActivity bnds=[844,1106][1048,1443]} from uid 10008 pid 3160
01-17 23:13:39.415   906  2950 D OneplusAppPreload: com.mikrotik.android.tikapp is not preload, feed it  in ActivityStarter
01-17 23:13:39.419   743   743 E ANDR-IOP: IOP HAL: Received pkg_name = com.mikrotik.android.tikapp pid = -1
01-17 23:13:39.420   906  1428 E OnePlusSmartBoostManager: cmd: iop_start -1 com.mikrotik.android.tikapp /data/app/com.mikrotik.android.tikapp-t9-lRKlMiU5bURpDuPFaqQ== false length = 109
01-17 23:13:39.421   963 16728 E ANDR-RAMBOOST_SERVER: ramboost cmd_len = 109 cmd: iop_start -1 com.mikrotik.android.tikapp /data/app/com.mikrotik.android.tikapp-t9-lRKlMiU5bURpDuPFaqQ== false
01-17 23:13:39.428   906  2950 D ActivityTrigger: activityStartTrigger: Activity is Triggerred in full screen ApplicationInfo{92350bc com.mikrotik.android.tikapp}
01-17 23:13:39.428   906  2950 E ActivityTrigger: activityStartTrigger: not whiteListedcom.mikrotik.android.tikapp/com.mikrotik.android.tikapp.activities.MainActivity/95
01-17 23:13:39.429   906  2950 D ActivityTrigger: activityResumeTrigger: The activity in ApplicationInfo{92350bc com.mikrotik.android.tikapp} is now in focus and seems to be in full-screen mode
01-17 23:13:39.429   906  2950 E ActivityTrigger: activityResumeTrigger: not whiteListedcom.mikrotik.android.tikapp/com.mikrotik.android.tikapp.activities.MainActivity/95
01-17 23:13:39.433  3160  3160 D Stats   : Intent.getPackage() is null. therefore try to get package name from componentName.getPackageName(): com.mikrotik.android.tikapp
01-17 23:13:39.435   906  2950 D ActivityTrigger: activityResumeTrigger: The activity in ApplicationInfo{92350bc com.mikrotik.android.tikapp} is now in focus and seems to be in full-screen mode
01-17 23:13:39.435   906  2950 E ActivityTrigger: activityResumeTrigger: not whiteListedcom.mikrotik.android.tikapp/com.mikrotik.android.tikapp.activities.MainActivity/95
01-17 23:13:39.435   906  1027 D RestartProcessManager: Update Total Launch Times :com.mikrotik.android.tikapp
01-17 23:13:39.435   906  1027 D RestartProcessManager: updateSelf :  com.mikrotik.android.tikapp, size : 30
01-17 23:13:39.435   906  1027 D RestartProcessManager: Increase Total Launch Time : com.mikrotik.android.tikapp, times : 1, index : 29
01-17 23:13:39.435   906  1027 D RestartProcessManager: Last Running Package : com.mikrotik.android.tikapp , start time 1547759619435
01-17 23:13:39.452  3160  4384 D GridItemProvider: saveToolBoxItemsToPreference: jsonStr= [{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.mikrotik.android.tikapp.activities.MainActivity","mPackage":"com.mikrotik.android.tikapp"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.mikrotik.android.tikapp"},"itemType":0,"launchCount":24,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.android.vending.AssetBrowserActivity","mPackage":"com.android.vending"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.android.vending"},"itemType":0,"launchCount":61,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.android.settings.Settings","mPackage":"com.android.settings"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.android.settings"},"itemType":0,"launchCount":232,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"org.thunderdog.challegram.MainActivity","mPackage":"org.thunderdog.challegram"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"org.thunderdog.challegram"},"itemType":0,"launchCount":34,"restored":4,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.whatsapp.Main","mPackage":"com.whatsapp"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.whatsapp"},"itemType":0,"launchCount":239,"restored":4,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.google.android.maps.MapsActivity","mPackage":"com.google.android.apps.maps"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.google.android.apps.maps"},"itemType":0,"launchCount":69,"restored":4,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.joaomgcd.autoapps.ActivityLaunchApp","mPackage":"com.joaomgcd.autolocation"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.joaomgcd.autolocation"},"itemType":0,"launchCount":15,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.ring.launch.LaunchActivity","mPackage":"com.ring.future"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.ring.future"},"itemType":0,"launchCount":113,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.ftband.app.StartActivity.Mono","mPackage":"com.ftband.mono"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.ftband.mono"},"itemType":0,"launchCount":39,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.google.android.apps.photos.home.HomeActivity","mPackage":"com.google.android.apps.photos"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.google.android.apps.photos"},"itemType":0,"launchCount":212,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.android.camera.CameraLauncher","mPackage":"com.google.android.GoogleCamera"},"mContentUserHint":-2,"mFlags":270532608,"mPackage":"com.google.android.GoogleCamera"},"itemType":0,"launchCount":43,"restored":0,"serialNumber":0},{"id":0,"intent":{"mAction":"android.intent.action.MAIN","mCategories":["android.intent.category.LAUNCHER"],"mComponent":{"mClass":"com.vrem.wifianalyzer.SplashActivity","mPackage":"com.vrem.
01-17 23:13:39.453   906  1052 I ActivityManager: Start proc 16729:com.mikrotik.android.tikapp/u0a131 for activity com.mikrotik.android.tikapp/.activities.MainActivity
01-17 23:13:39.467   906  2950 D OnePlusSmartBoostManager: writeHotCount com.mikrotik.android.tikapp, pid=16729
01-17 23:13:39.475   906  2950 D OneplusAppPreload: com.mikrotik.android.tikapp is not preload, collectAppFocusEvent
01-17 23:13:39.523 16729 16747 I FA      :   adb shell setprop debug.firebase.analytics.app com.mikrotik.android.tikapp
01-17 23:13:39.556   906  1027 D RestartProcessManager: Duration is too short, ignore : 119 in com.mikrotik.android.tikapp
01-17 23:13:39.584 16729 16729 E AndroidRuntime: Process: com.mikrotik.android.tikapp, PID: 16729
01-17 23:13:39.584 16729 16729 E AndroidRuntime: java.lang.RuntimeException: Unable to start activity ComponentInfo{com.mikrotik.android.tikapp/com.mikrotik.android.tikapp.activities.MainActivity}: android.view.InflateException: Binary XML file line #27: Binary XML file line #27: Error inflating class ImageView
01-17 23:13:39.584 16729 16729 E AndroidRuntime: 	at com.mikrotik.android.tikapp.activities.MainActivity.onCreate(MainActivity.java:193)
01-17 23:13:40.055   906  1027 W ActivityManager: Activity pause timeout for ActivityRecord{2c4e819 u0 com.mikrotik.android.tikapp/.activities.MainActivity t2784 f}
01-17 23:13:43.586 16729 16729 E AndroidRuntime: Process: com.mikrotik.android.tikapp, PID: 16729
01-17 23:13:43.586 16729 16729 E AndroidRuntime: java.lang.RuntimeException: Unable to start activity ComponentInfo{com.mikrotik.android.tikapp/com.mikrotik.android.tikapp.activities.MainActivity}: android.view.InflateException: Binary XML file line #27: Binary XML file line #27: Error inflating class ImageView
01-17 23:13:43.586 16729 16729 E AndroidRuntime: 	at com.mikrotik.android.tikapp.activities.MainActivity.onCreate(MainActivity.java:193)
01-17 23:13:43.599   906  2951 D AbnormalMonitor: appCrash :com.mikrotik.android.tikapp
01-17 23:13:43.657   906  3389 I ActivityManager: Process com.mikrotik.android.tikapp (pid 16729) has died: cch  CRE 
01-17 23:13:43.664   772  2127 W SurfaceFlinger: Attempting to destroy on removed layer: AppWindowToken{c1052bf token=Token{8e4a0de ActivityRecord{2c4e819 u0 com.mikrotik.android.tikapp/.activities.MainActivity t2784}}}#0

MDE · Thu Jan 31, 2019 3:12 pm

What bugfixes came with the update 31 Jan 2019

Sent from my VTR-L29 using Tapatalk

msatter · Thu Jan 31, 2019 11:24 pm

Looks realy good and the addresslists works now and the APP does not crash anymore on reading the lists.

jimmyz · Fri Feb 01, 2019 9:39 am

v1.1.1
• Bug fixes

v1.1.0
• Added database unlock using fingerprint/biometrics (password needs to be updated)
• Added groups for managed devices
• Added item list sorting and filtering
• Added System -> Licence import/export
• Allow to reset managed devices if forgot password
• Show overview for Ping and Torch
• Load item lists faster
• Fixed device discovery issues for Android P

It looks OK on a Huawei P10 plus pie

Chupaka · Fri Feb 01, 2019 10:33 am

• Allow to reset managed devices if forgot password

Should read as "allow to reset the list of managed devices, not devices themself"

JT1231 · Sat Feb 02, 2019 1:09 am

Sorry if this question has been asked I just created my account today, I was wondering if there was a way for the Mikrotik app to discover a router via ethernet as I am using the app on a chromebook with an adapter. I was also wondering if there was a way to refresh the discover page as I normally don't find any devices show up but I can login to them manually with an IP/username.

florid · Fri Feb 08, 2019 1:34 am

Is it possible to increase the request timeout limit?
I use this app to connect to a remote router in different country. It always disconnected with timeout message when pulling 'big' data such as view Log / Address list etc.

shujanster · Wed Feb 20, 2019 2:51 am

Version 1.1.2 bug report
1. PPPoE server interface unknown.
2. Routes reachable null.
3. BGP peers not showing.
4. Logging rules null.
5. Log topics: null null.

Sent from my Redmi Note 5 using Tapatalk

Wed Feb 20, 2019 9:19 am

Thanks, we have fixed these issues.

mikelaurense · Sun Feb 24, 2019 2:03 pm

When updating the router via the iOS app, it hangs at 99% (probably because the router is rebooted). After a while it returns to the login screen, but there is no way to cancel this dialog

omb · Mon Feb 25, 2019 2:24 pm

Hi, I just bought a new phone with the android one thing, a Xiaomi MI A2 Lite, running android 8.1.0, on my last phone the app was working great, but on this one I'm able to log in to any equipment except CCR's. It gets stuck on "Downloading plugins" and if I check the log it says that I successfully logged in and then logged out from tik app. Anyone else having this problem? I already tried clearing the cache and reinstalling the app, also checked all the permissions and allowed unrestricted access to internet on the app. Tried it from my home network and from LTE.

Yes, I'm facing the same issue asi you are. Stuck at "Downloading plugins" and in the MTik log is shown "user admin has logged in from %IP% via tikapp" and after few second "... logged out..."
I've tried to add a simple FW input rule form my MAC but without success, neither over LAN nor WAN (LTE).

Does anyone succesfully resolve this issue?

omb · Thu Mar 07, 2019 8:42 am

Hi, I just bought a new phone with the android one thing, a Xiaomi MI A2 Lite, running android 8.1.0, on my last phone the app was working great, but on this one I'm able to log in to any equipment except CCR's. It gets stuck on "Downloading plugins" and if I check the log it says that I successfully logged in and then logged out from tik app. Anyone else having this problem? I already tried clearing the cache and reinstalling the app, also checked all the permissions and allowed unrestricted access to internet on the app. Tried it from my home network and from LTE.
Yes, I'm facing the same issue asi you are. Stuck at "Downloading plugins" and in the MTik log is shown "user admin has logged in from %IP% via tikapp" and after few second "... logged out..."
I've tried to add a simple FW input rule form my MAC but without success, neither over LAN nor WAN (LTE).

Does anyone succesfully resolve this issue?

UPDATE: The strange thing is, that with the same phone and same Tik App I'm able to connect to my newly bought and configured RB951G-2HnD. So it looks like there is einther some missconfiguration or incompatibility between RB750Gr3 and Tik App. I tried second RB750Gr3 and get stuck at the same point "Downloading plugins", so it looks like that it would be some incompatibility than misconfiguration.
Both RB750Gr3 are running version RouterOS 6.42.6, RB951G-2HnD is running 6.43.12

omb · Thu Mar 07, 2019 9:02 am

Hi, I just bought a new phone with the android one thing, a Xiaomi MI A2 Lite, running android 8.1.0, on my last phone the app was working great, but on this one I'm able to log in to any equipment except CCR's. It gets stuck on "Downloading plugins" and if I check the log it says that I successfully logged in and then logged out from tik app. Anyone else having this problem? I already tried clearing the cache and reinstalling the app, also checked all the permissions and allowed unrestricted access to internet on the app. Tried it from my home network and from LTE.
Yes, I'm facing the same issue asi you are. Stuck at "Downloading plugins" and in the MTik log is shown "user admin has logged in from %IP% via tikapp" and after few second "... logged out..."
I've tried to add a simple FW input rule form my MAC but without success, neither over LAN nor WAN (LTE).

Does anyone succesfully resolve this issue?
UPDATE: The strange thing is, that with the same phone and same Tik App I'm able to connect to my newly bought and configured RB951G-2HnD. So it looks like there is einther some missconfiguration or incompatibility between RB750Gr3 and Tik App. I tried second RB750Gr3 and get stuck at the same point "Downloading plugins", so it looks like that it would be some incompatibility than misconfiguration.
Both RB750Gr3 are running version RouterOS 6.42.6, RB951G-2HnD is running 6.43.12

UPDATE2:
I'M REALLY DUMB!
Dealing with problem that has been resolved. I have just one advise for all in here - KEEP YOUR DEVICE UP TO DATE!
Upgrading RB to latest version and problem resolved...

ronniee · Tue Mar 19, 2019 12:11 pm

The first intro screen after login "New software available" has been removed (iOS version 1.0.1)? Why? It was easy to upgrade with 1 click.

Now I don't find, or isn't easy to tell customers how to upgrade there router with this app.
Setting-> System -> Packages -> Check for upgrade here the new version not show for ex I have 6.43.x doesnt show for me 6.44.1.
this is a bug?
what is the easyest way to upgrade a router?

Tue Mar 19, 2019 12:56 pm

It's still there on main screen. Are you in the correct upgrade channel? Maybe there is no new version

r00t · Tue Mar 19, 2019 3:34 pm

Please make initial screen after connect (dashboard?) configurable. I can't care less about kid control or internet detect, these are just taking space.
Instead, having last 10 log entries, graph of traffic on selected interfaces, list of registered wifi clients, or DHCP clients... or simply shortcuts for some other pages would be far more useful.
I know Tik App is aimed at SOHO users to configure routers without PC, but a bit of customization would make even better.

anav · Tue Mar 19, 2019 3:46 pm

Where can we find the latest version of the app, or more accurately how do we know if we have the latest version of the app installed.
Perhaps on your MT download page you can have an information entry?

Perhaps another blue square next to WINBOX - THEDUDE - NETINSTALL - MT APP -

The pull down for this blue box would simply show two entries plus the circular LOGO with red markings) so that we get used to it.
a. IOS Version 0.24 ?? (+Changelog history Link)
b. Android Version x.xx ?? ((+Changelog history Link)

Looking for an update myself, via google search I found these imposters and perhaps an education piece to NOT use them (not official or recommended).
https://tiktool-mobile-winbox-ios.soft112.com/
https://itunes.apple.com/us/app/iwinbox ... 81490?mt=8

msatter · Tue Mar 19, 2019 4:59 pm

https://mikrotik.com/mobile_app
then you reach
https://play.google.com/store/apps/deta ... oid.tikapp
or
https://itunes.apple.com/app/id1323064830

Chupaka · Tue Mar 19, 2019 5:14 pm

I can't care less about kid control or internet detect, these are just taking space.

BTW, I found that enabling Internet detect shows graphs of your WAN interfaces =)

anav · Tue Mar 19, 2019 6:32 pm

https://mikrotik.com/mobile_app
then you reach
https://play.google.com/store/apps/deta ... oid.tikapp
or
https://itunes.apple.com/app/id1323064830

ARE YOU DEAF??

My post has nothing to do with getting the APP. It has everything to do with making sure the APP is up to date and informing MT users which is the latest app version.
For example my APP was on version 0.24. I was fat dumb and happy. NO INDICATIONS were provided UNLIKE other apps, that my app was out of date or that updates were available.
Just for giggles today I went to the APP store and saw the APP. Didnt see any version number but downloaded it again just for shits and giggles. I was UNPLEASANTLY surprised that he version went to 1.0.1.

Thus two things come to the fore.
a. the APP is not auto-updating or at least not informing users that there is an update available (which all my other apps do).
b. there is no visible means for me to know what is the latest app version available and probably should be using.

msatter · Tue Mar 19, 2019 7:08 pm

I AM NOT DEAF I ONLY CAN'T READ.

anav · Tue Mar 19, 2019 7:23 pm

I AM NOT DEAF I ONLY CAN'T READ.

Ahh, that explains it. I wasn't using deaf in the literal sense but in the context of not paying attention. Although I don't know why I am explaining this in text as you cannot read.
Perhaps I should yell very loudly into the air and you may hear me.

r00t · Tue Mar 19, 2019 7:52 pm

I can't care less about kid control or internet detect, these are just taking space.
BTW, I found that enabling Internet detect shows graphs of your WAN interfaces =)

I would rather not have to join the botnet just for the privilege of seeing interface graphs...

Chupaka · Wed Mar 20, 2019 12:24 am

I would rather not have to join the botnet just for the privilege of seeing interface graphs...

If you don't want to join botnet, remove this app from your phone

Wed Mar 20, 2019 8:48 am

My post has nothing to do with getting the APP. It has everything to do with making sure the APP is up to date and informing MT users which is the latest app version.

Have you used a smartphone before? The mechanism is identical to any other app on your phone. Make sure Google Play or AppStore (depends on your phone model) is checking for software updates. If you need assistance, you can always ask a younger family member.

anav · Wed Mar 20, 2019 10:25 am

My post has nothing to do with getting the APP. It has everything to do with making sure the APP is up to date and informing MT users which is the latest app version.
Have you used a smartphone before? The mechanism is identical to any other app on your phone. Make sure Google Play or AppStore (depends on your phone model) is checking for software updates. If you need assistance, you can always ask a younger family member.

Too funny, that is exactly how I get most of my 'how to use my phone' information!! Stay tuned.

msatter · Wed Mar 20, 2019 12:17 pm

My post has nothing to do with getting the APP. It has everything to do with making sure the APP is up to date and informing MT users which is the latest app version.
For example my APP was on version 0.24. I was fat dumb and happy. NO INDICATIONS were provided UNLIKE other apps, that my app was out of date or that updates were available.
Just for giggles today I went to the APP store and saw the APP. Didnt see any version number but downloaded it again just for shits and giggles. I was UNPLEASANTLY surprised that he version went to 1.0.1.

Thus two things come to the fore.
a. the APP is not auto-updating or at least not informing users that there is an update available (which all my other apps do).
b. there is no visible means for me to know what is the latest app version available and probably should be using.

The app is still in the Beta channel (Play Store) and it will appear in list of updated apps each time when being updated. I don't auto-update for security reasons.
On the page of the app the version number is being displayed.

v1.1.5
• Show if wireless interface is managed by CAPsMAN
• Added "Limited Access" tag to internet detect
• Show remove config option after config is reset
• Bring ordered by field value to top of item cell
.
.

Update: not in the Beta channel anymore and if you are on Beta, install again after leaving the Beta channel in the Play Store.

Wed Mar 20, 2019 12:36 pm

Neither of the two apps are in Beta anymore. Delete them, and install them again from the regular stores, if you still see the beta.

raffav · Wed Mar 20, 2019 12:46 pm

@normis
On the last MUM in the introduction by MT was told that you want to add some functionality that exists on the mobile app in the Winbox that mean that winbox will rebuild?

Features request: please add the search also in the iOS app
also please add the ability to sort them on both apps

Wed Mar 20, 2019 1:02 pm

No, the reverse. Winbox is not getting features, mobile apps are getting features.
Yes, saved device search and sorting is coming to iOS too.

msatter · Wed Mar 20, 2019 1:07 pm

Neither of the two apps are in Beta anymore. Delete them, and install them again from the regular stores, if you still see the beta.

I uninstalled the APP and installed it again but is still stating beta on the APP page and shows up in my beta list in the Play Store.

Got it. I have first to leave the Beta for this APP.

So unstalling is not working and first you have Leave Beta.

krisjanisj · Wed Mar 20, 2019 1:15 pm

As @msatter already mentioned - steps to move to Public release channel for Android App:
1) In MikroTik PlayStore page You need to leave BETA
Before:

After:

2) Uninstall BETA app

3) Install the app again, now it should use the public version of app.

anav · Wed Mar 20, 2019 5:17 pm

My post has nothing to do with getting the APP. It has everything to do with making sure the APP is up to date and informing MT users which is the latest app version.
Have you used a smartphone before? The mechanism is identical to any other app on your phone. Make sure Google Play or AppStore (depends on your phone model) is checking for software updates. If you need assistance, you can always ask a younger family member.

Hate to burst your bubble, but since I know you are fallible... ;-P
I checked with my younger 'experts' and my settings and use of the Iphone were correct. Automated updates is selected.
I am repeating myself, but apps that have updates ready do show up when I select the App Store and I simply have to select udpate per app or update all. This has worked well for sometime. That is why when I was sitting at 0.24, with no updates being presented as an option, I assumed I was good to go. Then I checked the MT website for downloads where ALL other firmwares are communicated and noted there was no banner or any positive communication to let us know what versions were current and any changelog history. Sorry if have expectations of some sorta standard approach to config management LOL. Much thanks to a poster who noted that the version is available on the APP itself when searching on the APP store. It is not readily visible, one has to click on the APP selection to get the more detailed info (something I rarely do, just download and go). This info should be mirrored/available on the website is my recommendation. Which I sadly have to make,.......
What would have been the proper response is......
Great Phukin Idea Mate. I will get that up on our website tomorrow,,,,,,, errr make that in one week we are having serious forum website issues at the moment which are taking up our non-coder monkeys time. I didnt mean that literally, although sometimes I do have the urge to send you bananas.

Thu Mar 21, 2019 8:58 am

Well the above posters already gave a hint. You have joined a private beta program and installed that invite-only version. You should delete it, delete the "TestFlight" app which manages the Beta programs, and then install the application that is meant for everyone (the one in the AppStore).

nostromog · Thu Mar 21, 2019 10:32 am

Well the above posters already gave a hint. You have joined a private beta program and installed that invite-only version. You should delete it, delete the "TestFlight" app which manages the Beta programs, and then install the application that is meant for everyone (the one in the AppStore).

Probably it is different for Android, but I have not left the beta and I'm on 1.1.5.

I will eventually leave the beta, but I'm traveling with bad connectivity, and the threat to lose all my settings was enough to stop me holding the button

Sent from my Redmi Note 5 using Tapatalk

krisjanisj · Thu Mar 21, 2019 10:51 am

Well the above posters already gave a hint. You have joined a private beta program and installed that invite-only version. You should delete it, delete the "TestFlight" app which manages the Beta programs, and then install the application that is meant for everyone (the one in the AppStore).
Probably it is different for Android, but I have not left the beta and I'm on 1.1.5.

I will eventually leave the beta, but I'm traveling with bad connectivity, and the threat to lose all my settings was enough to stop me holding the button

Sent from my Redmi Note 5 using Tapatalk

What @normis mentioned was for IOS devices. See either mine or @msatter posts above with explanation for Android

anav · Thu Apr 04, 2019 7:28 pm

Just wanted to chime in that the APP is working great ---> Router accessed remotely via IKEv2 connection to get to the router and then access APP once internal to the router.

nostromog · Fri Apr 05, 2019 2:05 am

Just wanted to chime in that the APP is working great ---> Router accessed remotely via IKEv2 connection to get to the router and then access APP once internal to the router.

Fully agreed, last versions are good!

One nit: I have a mAL Lite as Travel Router, and it has the main wireless interface in station mode (I called it sta1). The app shows it as "sta1. Connected to _______"

It uses /interface wireless get sta1 ssid , instead of ([/interface wireless monitor sta1 as-value once ]->"ssid") which is the real connected ssid. In my case, as I use a connect-list. It actually offers me to enter ssid and password if I click on it, but it does not work because of the connect list itself...

Fraction · Tue Apr 09, 2019 5:35 pm

Any plans to add support for RoMON-connections?

Chupaka · Tue Apr 09, 2019 5:50 pm

Probably we should rename this topic so that it doesn't contain "alpha" anymore... Or start a new one and make it sticky in Announcements

sterod · Sun Apr 21, 2019 5:03 pm

Can you please add the option to sort the list of Saved devices by their Note

I have over a hundred devices in this list and without sorting its very difficult to find a particular host. I realize the search magnifying glass button is there, but I would prefer an ordered list to begin with.

Thank You

Sent from my Pixel 3 using Tapatalk

ursulab · Fri May 10, 2019 2:21 pm

Is there a way to restrict which menus a user can see like with webfig skins? I don't want a basic user that only needs to change their wifi ssid and password or access the Kid Control to go digging around all the other menus. With webfig it sort of works that a regular user can't see the menu items (although it can still be accessed if they know how), but with the mobile app it's all right there.

If the mobile app just uses the skin as presented by webfig it would be awesome!

Ayaz · Wed May 22, 2019 3:52 pm

Hi, Dear all

Is this app uses secure connection to access a routeros device?

vortex · Sat May 25, 2019 5:41 pm

When will you put the app on another store?

Chupaka · Sun May 26, 2019 1:08 am

When will you put the app on another store?

What store?

raffav · Mon May 27, 2019 4:15 pm

When will you put the app on another store?
What store?

like store outside google and apple, just the APK
Maybe huawei smartphone detected

AzAel76 · Tue May 28, 2019 1:14 am

The recent release 1.2.2 is a Massive improvement in functionality. Well done all. I have used it a couple of times already since the update and it is working very well.

yacsap · Tue May 28, 2019 2:49 am

When will you put the app on another store?
What store?
like store outside google and apple, just the APK
Maybe huawei smartphone detected

Or maybe they got it from Hong Meng Play Store

vortex · Wed May 29, 2019 8:59 pm

When will you put the app on another store?
What store?

Like Amazon or Aptoide.

vitaly2016 · Mon Jun 24, 2019 1:09 pm

How to manage more then 1 device in this application?
"SAVED" tab reports "No devices saved" and there is no option to save current connection.
Dotted menu "Import devices"/"Export devices" doesn't seem to work.

Chupaka · Mon Jun 24, 2019 1:15 pm

and there is no option to save current connection.

There are two big buttons next to each other: "SAVE" and "CONNECT"

vitaly2016 · Mon Jun 24, 2019 1:45 pm

There are two big buttons next to each other: "SAVE" and "CONNECT"

Thank you. I really wonder how can I miss this really big button "SAVE".

myke1124 · Mon Jul 22, 2019 7:23 pm

"Kid Control" in the apple app is missing.

JanezFord · Tue Jul 23, 2019 11:53 am

With latest update in IOS 1.0.10 I cant't connect anymore: invalid username/password for every device. Anyone else experiencing this?

JF.

Tue Jul 23, 2019 11:56 am

Upgrade your RouterOS too, the authentication process is different in new versions

jimmyz · Tue Jul 23, 2019 1:40 pm

like store outside google and apple, just the APK

Oh, please do. Not everyone has (or wants to have) a playstore account.

Tue Jul 23, 2019 1:49 pm

You can't have the cake and eat it

P.S.: or ... Και την πίτα ολόκληρη και τον σκύλο χορτάτο

nescafe2002 · Tue Jul 23, 2019 2:06 pm

JanezFord: Update your app to version 1.0.11 if you cannot connect to ROS >= 6.45:

1.0.11 Jul 23, 2019
- Login: Fixed connection issue for RouterOS 6.45

JanezFord · Tue Jul 23, 2019 4:12 pm

JanezFord: Update your app to version 1.0.11 if you cannot connect to ROS >= 6.45:

1.0.11 Jul 23, 2019
- Login: Fixed connection issue for RouterOS 6.45

It works! Todays update to 1.0.11 fixes the problem.

JF

JanezFord · Tue Jul 23, 2019 4:15 pm

Upgrade your RouterOS too, the authentication process is different in new versions

I am running 6.45.1 ... I do not dare to upgrade to 6.45.2 due to SPF+ problems on 4011. I use SPF+ port for WAN.

It works OK now with todays release of Mikrotik IOS app 1.0.11. 1.0.10 was the problem.

JF.

sibi1979 · Thu Jul 25, 2019 11:51 am

IOS app v1.0.11 :

1. Kid Control is currently still missing in the IOS app v1.0.11. It is not possible to add it to the main screen. When will it be implemented ?
2. When going to "IP - Kid Control - Kids" & add a new kid - apply config, the app crashes.
3. Upgrading the caps is not working (all configured through capsman)

How can I restrict the features in the Mikrotik app (Android & IOS) so that the end user can only use the kid control & change SSID / password ?

It would be good to have a separate topic for the Android and IOS app on this forum. Also a tab with an overview of the software versions with related bug fixes.
The mobile app is a very strong feature. it is the only visible point for my customers and a strong selling point.

Thanks a lot !

raffav · Sat Aug 24, 2019 12:21 pm

The new version on android crash when you enter master password

Sent from my Moto Z3 Play using Tapatalk

vortex · Mon Aug 26, 2019 7:34 pm

You can't have the cake and eat it

Antitrust?

Tue Aug 27, 2019 2:12 pm

Ask Apple

krafg · Mon Sep 16, 2019 3:33 pm

Sorry, I not know if this is the correct theard to this, but I'm using the last release (v1.3.2) and I get this (see attached image)

Regards.

Mon Sep 16, 2019 3:56 pm

Looks like legend is missing some text, please report such issues to support@mikrotik.com

What Android are you running, and what routerOS version?

nabilx · Tue Oct 01, 2019 7:26 pm

Hi
I'm intersted in translating the app to arabic language , is there something like that available I will be happy to help.

vortex · Sun Oct 27, 2019 3:40 am

Ask Apple

Why should Apple decide how an Android application is distributed?

MicroW · Thu Nov 14, 2019 12:20 pm

The link doesn't seem to be working for me for some reason?

Chupaka · Thu Nov 14, 2019 2:28 pm

The link doesn't seem to be working for me for some reason?

I updated the link (the app is out of testing for some time already), but generally you should just search for "MikroTik" in Play Store or Apple Store.

myke1124 · Thu Nov 21, 2019 2:02 am

IOS app v1.0.11 :

1. Kid Control is currently still missing in the IOS app v1.0.11. It is not possible to add it to the main screen. When will it be implemented ?

@normis -> Is this something that was overlooked with iOS ? Is this something we will see in the future?

Chaosphere64 · Tue Nov 26, 2019 9:15 am

IOS App v1.0.23

The app does not show the current configuration on wider parts of the CAPsMAN menus. Example Datapath menu: I configured two datapathes, and both are shown here, but the configuration inside is blank from the perspective of the app (no VLAN ID, no CtoC Forwarding etc.). Same settings are shown on Android without a problem.

Etz · Wed Dec 25, 2019 11:59 pm

How do you delete saved device/group from app?

EDIT: Nevermind, noob on IOS, found it.

thobias · Fri Feb 14, 2020 12:57 pm

Android V1.3.10
Missing some menu items
IP->Firewall->Address Lists: cannot filter by address
Also comment field seems to be missing from most, if not all menus when adding new items

CyB3RMX · Mon Mar 02, 2020 9:50 am

should be nice to have push notifications via the App... and personalize them via scripting in the router.. So you can make your own notifications... Right now i use telegram but would be nice to be able to use this feature as native.

Mon Mar 02, 2020 9:54 am

The app doesn't stay connected to the router when you don't use it, and there is no cloud service in between.

jmba · Mon Mar 02, 2020 11:51 pm

Hi,

It is possible to create a shortcut in the app main menu for example of a script?

Thank you

ClintStallman · Sat Aug 15, 2020 10:49 pm

Hi, I just bought a new phone with the android one thing, a Xiaomi MI A2 Lite, running android 8.1.0, on my last phone the app was working great, but on this one I'm able to log in to any equipment except CCR's. It gets stuck on "Downloading plugins" and if I check the log it says that I successfully logged in and then logged out from tik app. Anyone else having this problem? I already tried clearing the cache and reinstalling the app, also checked all the permissions and allowed unrestricted access to internet on the app. Tried it from my home network and from LTE.
Yes, I'm facing the same issue asi you are. Stuck at "Downloading plugins" and in the MTik log is shown "user admin has logged in from %IP% via tikapp" and after few second "... logged out..."
I've tried to add a simple FW input rule form my MAC but without success, neither over LAN nor WAN (LTE).

Does anyone succesfully resolve this issue?
UPDATE: The strange thing is, that with the same phone and same Tik App I'm able to connect to my newly bought and configured RB951G-2HnD. So it looks like there is einther some missconfiguration or incompatibility between RB750Gr3 and Tik App. I tried second RB750Gr3 and get stuck at the same point "Downloading plugins", so it looks like that it would be some incompatibility than misconfiguration.
Both RB750Gr3 are running version RouterOS 6.42.6, RB951G-2HnD is running 6.43.12
UPDATE2:
I'M REALLY DUMB!
Dealing with problem that has been resolved. I have just one advise for all in here - KEEP YOUR DEVICE UP TO DATE!
Upgrading RB to latest version and problem resolved...

I am facing the same issue and it is driving me crazy, the issue is there since 3 routerOs upgrades(stable versions always) and 2 iOS app upgrades

Description: cannot connect to cAP AC via iOS app 1.2.6 and even cannot load the web interface( tested with chrome and safari, same result), loading for long time than timeot.
Some facts:
- the internet and reacheability of crs112 and other devices on wlan and lan is OK from the iphone through the AP
- The app can find the AP in discovered.
- connection is working from laptop and from huawei mobile(web and also android app and winbox)
- RouterOS version - 6.47.1 stable
- rebooted, upgraded today, still no success
- connection from iOS app and web working and always worked to CRS112 with same routerOS
- iphone and huawei connects from same subnet etc. I have no fw rule to block myself , ip services is enabled for winbox, api and everything...
- logs showing the same as above
- I changed the IP for iphone and assigned a static one, different one from same subnet. the web page loaded but cannot log in and than timeout, than opened the app and the connection loaded and authenticated for 2 seconds worked than disconnected...and not worked since this anymore even the load of the web page

please help me to troubleshoot it further, I can collect any logs just send me what would be healpfull, thanks.
I found some info that the power is so low and cannot load the page so I tested it with poe injection not just with poe from the crs, no luck

update: I downloaded an cli app for iOS, tested ping and telnet to the AP and no luck, request timeout.

macsrwe · Wed Feb 10, 2021 2:14 am

How do I associate a saved router with a group? If I do as little as edit the name of a saved router, it gets saved into the "No group" group. I can delete the router entry, but I can't move it up or down, and there's nowhere to specify the group on the page where one adds or edits routers (login).

raffav · Wed Feb 10, 2021 2:20 am

How do I associate a saved router with a group? If I do as little as edit the name of a saved router, it gets saved into the "No group" group. I can delete the router entry, but I can't move it up or down, and there's nowhere to specify the group on the page where one adds or edits routers (login).

tools> adv mode then you will have group filed where you can add/create a group

macsrwe · Wed Feb 10, 2021 3:07 am

How do I associate a saved router with a group? If I do as little as edit the name of a saved router, it gets saved into the "No group" group. I can delete the router entry, but I can't move it up or down, and there's nowhere to specify the group on the page where one adds or edits routers (login).
tools> adv mode then you will have group filed where you can add/create a group

I don't have a "tools." I have a gear, which opens up to Settings, and there is nothing there about either an advanced mode or groups (I had checked it previously for a groups control).

I hate to sound stupid, especially since it's obvious I had this working before. Either my memory is failing or MT did an app update since and lost a feature. I'm running 1.2.8, the current Apple App Store version.

macsrwe · Wed Feb 10, 2021 3:10 am

On another note, my usual practice to test for DNS failure is to go into terminal and type ":put [:resolve some_domain_name]". Since there's no terminal in the app, what do people do instead?

Maybe it would be a good idea for MT to add a "resolve" screen inside the DNS tool, or inside Tools.

raffav · Wed Feb 10, 2021 3:33 am

Lool sorry I did not realised that this is the mobile app sorry my bad [emoji2357]

Sent from my Moto Z3 Play using Tapatalk

Chupaka · Wed Feb 10, 2021 12:54 pm

Since there's no terminal in the app, what do people do instead?

Are you sure there's no?.. At least in Android version we have one.

macsrwe · Wed Feb 10, 2021 1:04 pm

Since there's no terminal in the app, what do people do instead?
Are you sure there's no?.. At least in Android version we have one.

There's no Terminal (or New Terminal) in the top-level menu, and no Telnet in the Tools menu. Maybe it's hidden somewhere else, but it's not where it would be in Winbox.

r00t · Wed Feb 10, 2021 2:57 pm

The app doesn't stay connected to the router when you don't use it

This is rather annoying, as you can't just use the app to monitor router for a longer time. Yesterday I wanted to watch log output, but App always froze after a minute (just stopped displaying new log entries) and then when I touched the display it disconnected. App was running in the foreground all the time, with screen on. So why not keep connection alive like desktop winbox does? I have to constantly do something with the App otherwise connection timeouts... stupid.

jimmyz · Thu Feb 11, 2021 9:10 am

+1, maybe add a switch for the user to "Stay always connected", on the price of an empty batterty.

mozerd · Thu Feb 11, 2021 11:32 pm

Current Tikapp is basically a Winbox copy. What else did you expect?

I just installed the Tikapp for IOS on my iPhone8 and from what I can see it does not have anywhere near the functionality of Winbox ??? in fact the functionality is very limited. What am I missing?

[Edit] My apologies... found the Advanced settings ... Everything I need is there ... if anyone is wondering where they are look for the gear top right corner.

Mikhalich · Mon Feb 15, 2021 1:06 pm

Can we hope for the appearance of Dude functionality in the Mikrotik application? At least the ability to view maps like in Dude app for Windows?

macsrwe · Mon Feb 15, 2021 11:51 pm

How do I associate a saved router with a group? If I do as little as edit the name of a saved router, it gets saved into the "No group" group. I can delete the router entry, but I can't move it up or down, and there's nowhere to specify the group on the page where one adds or edits routers (login).

If the boys in Latvia are answering questions these days, I'm still waiting for an answer to this one.

Plus another one: I can create new firewall rules in the app, but I can't move them into the proper positions. They won't drag, and I can't find any control anywhere in either the Filters or the Rule panels that lets me type in an absolute numeric position like the CLI has.

macsrwe · Wed Mar 17, 2021 9:22 pm

How do I associate a saved router with a group? If I do as little as edit the name of a saved router, it gets saved into the "No group" group. I can delete the router entry, but I can't move it up or down, and there's nowhere to specify the group on the page where one adds or edits routers (login).
If the boys in Latvia are answering questions these days, I'm still waiting for an answer to this one.

Plus another one: I can create new firewall rules in the app, but I can't move them into the proper positions. They won't drag, and I can't find any control anywhere in either the Filters or the Rule panels that lets me type in an absolute numeric position like the CLI has.

My MikroTik app seems to have silently grown a new option for "Group" and "Note" in the save dialog box, so that's no longer a lack.

Still can't rearrange my firewall rules, though.

prmfeddema · Sat Mar 20, 2021 3:49 pm

Thanks for all the hard work in the app over there years - but can i make a suggestion: Mikrotik seems to be only one who understand kid control properly and while i have no problem using winbox to do settings, my other half just wants to use the app. That being said: the kid control menu in the app (the one straight from the home screen, not the one through the advanced menu) has some sync problems (adding times to access the internet is not updated when adding a time slot, bandwidth cannot be set and the override time slots are not visible). Is there a way to get this fixed/updated? I wouldn't mind a small donation to get this moving forward.

EvertVB · Sun Jul 04, 2021 1:37 pm

How do you delete saved device/group from app?

EDIT: Nevermind, noob on IOS, found it. :lol:

Can you share the process of deleting a Device.
Thanks

macsrwe · Sun Jul 04, 2021 1:39 pm

How do you delete saved device/group from app?

EDIT: Nevermind, noob on IOS, found it. :lol:
Can you share the process of deleting a Device.
Thanks

In IOS, drag it left.

EvertVB · Mon Jul 05, 2021 3:00 pm

How do you delete saved device/group from app?

EDIT: Nevermind, noob on IOS, found it. :lol:
Can you share the process of deleting a Device.
Thanks
In IOS, drag it left.

Great that worked - it brings up in Red the Delete option

raffav · Mon Aug 02, 2021 7:20 pm

I suggest you send a email to support directly,
Also just to confirm check user group where admin is and check if they have a full access to system

neogoth · Wed Aug 04, 2021 9:16 am

I have to admit that it is a bit oxymoron to have "serious" concerns about 3rd party data exposure when you use android which is pretty much spyware on its own :P
Android is a virus :lol:

Let me guess you are using Apple? Apple is not open source at all. Android is completely Open Source (AOSP). So everyone can clearly see that you have no knowledge on that part and only wanna be funny about a wrong thing. Pathetic.

Wed Aug 04, 2021 9:19 am

Let me stop you right there. Please keep on topic. This is not a place for another OS war.

skullzaflare · Fri Aug 06, 2021 5:22 pm

Hey guys i noticed from the newsletter that there are two Mikrotik apps in the gplay store now, "Mikrotik Pro" which is the ugly one i have always used in the past and a "Mikrotik Home"
I do really like the flow and interface in the "Home" version but it appears to not function at all for wifi related things on dual band routers (turns the 5g off and adjusts 2g even though app only lists 5g settings)
Is the Home version going to get more functionality added/fixed?

rextended · Fri Aug 06, 2021 5:31 pm

It's time to add port knocking and cloud checking to this App...

viewtopic.php?f=2&t=177027&p=868541#p868519

viewtopic.php?f=2&t=134538&p=871149#p871149

anav · Sat Aug 28, 2021 4:44 pm

It's time to add port knocking and cloud checking to this App...

viewtopic.php?f=2&t=177027&p=868541#p868519

viewtopic.php?f=2&t=134538&p=871149#p871149

Yes I want to port knock into my wireguard connection ;-PP

creatin · Mon Sep 27, 2021 1:14 pm

Why isn't there Terminal in IOS version? Are there any other functionalities missing on IOS but can be found on Android?

macsrwe · Mon Sep 27, 2021 1:17 pm

I assume it's because Android has *nix underpinnings/hooks, while iOS doesn't.

microtikgroup · Wed Sep 29, 2021 6:25 am

i used to connect very quickly from my iPhone using the tikapp. but now i am getting "failed to establish secure connection" ? within the same LAN network. is there something I need to change?

Chupaka · Wed Sep 29, 2021 6:21 pm

What has changed between "quickly connect" and "failed to establish a connection"?

rextended · Wed Sep 29, 2021 7:20 pm

Someone at Apple decided that he no longer need the app...

microtikgroup · Wed Sep 29, 2021 7:21 pm

What has changed between "quickly connect" and "failed to establish a connection"? :)

nothing
no config changes or anything like that

microtikgroup · Fri Oct 01, 2021 1:24 pm

fixed my problem. deleted the app already!

creatin · Tue Oct 05, 2021 1:00 pm

I'm using a lot of scripts on my MT devices, scripts are ran through Terminal which is not available on IOS.
Not sure why IOS bans use of Terminal in MT app.

macsrwe · Tue Oct 05, 2021 3:23 pm

scripts are ran through Terminal which is not available on IOS.
Not sure why IOS bans use of Terminal in MT app.

Scripts can be run by clicking the Run Script button. Scripts can be edited in the app also. You don't "need" terminal to run scripts.

rextended · Tue Oct 05, 2021 3:27 pm

I'm using a lot of scripts on my MT devices, scripts are ran through Terminal which is not available on IOS.
Not sure why IOS bans use of Terminal in MT app.

Because Apple has decided, for you, that you don't need the terminal, Apple informs you that you have to comply.

Larsa · Tue Oct 05, 2021 4:06 pm

Because Apple has decided, for you, that you don't need the terminal, Apple informs you that you have to comply.

Please no fud or os-war. Can you provide a reliable source that states ios apps won't allow ssh connections in console like mode?

rextended · Tue Oct 05, 2021 4:26 pm

Don't ask me, I didn't say it, and I don't have those conditioning tools.

macsrwe · Tue Oct 05, 2021 4:35 pm

There is an iOS app named Shelly that allows SSH connections to addresses, but of course I don't know how much of the underlying mechanism they had to provide themselves, because iOS is not built on a Unix base

Larsa · Tue Oct 05, 2021 4:41 pm

There is an iOS app named Shelly that allows SSH connections to addresses, but of course I don't know how much of the underlying mechanism they had to provide themselves, because iOS is not built on a Unix base

IOS is based on BSD "unix"

rextended · Tue Oct 05, 2021 4:41 pm

No, on XNU "Xnu is Not Unix" / Darwin

Larsa · Tue Oct 05, 2021 4:42 pm

Don't ask me, I didn't say it, and I don't have those conditioning tools.

Ok. But fwiw, we've been doing some custom made apps using both ssh and rdp and never heard about bans of terminal or console like connections in ios. Also, there are plenty of similar "console" apps in apple appstore so the issue is likely related to something else.

macsrwe · Tue Oct 05, 2021 4:55 pm

No, on XNU "Xnu is Not Unix" / Darwin

Sorry, I learned something today.

Larsa · Tue Oct 05, 2021 5:00 pm

No, on XNU "Xnu is Not Unix" / Darwin

Well, actually both apple darwin (xnu/macos) and ios are based on bsd. Steve Jobs once issued a competition between two rnd departments responsible for "ipod os" and "mac os". A slimmed down version of mac os won.

https://en.wikipedia.org/wiki/Compariso ... ng_systems
https://en.wikipedia.org/wiki/IOS

jbl42 · Tue Oct 05, 2021 5:17 pm

Android is "phoning home" all kind of stuff to Google and every other 3rd party willing to pay Google for data. Not to speak of all the ad-tracking networks it talks to all the time.
And no, Android is not open source. Big parts are, but the relevant data sensitive bits (Google Play Service and similar Google specific system stuff) are closed source. You pay for Android not with money but with your data. Its their business model. Always was.
So yes it is funny to have "serious concerns" about the MT app running on an Android.

But back to MT: A lot of MT devices are used in companies of all sizes. And trust me, we would notice if MT devices would initiate connections to "phone home" or somewhere else. Because the only way to pone home would be using our tightly monitored network infrastructure. MT devices would not last long here if something like this would be discovered. Same applies to most other companies similar to us.

If you do not trust MT, you probably should be using some other brand you trust more.

macsrwe · Tue Oct 05, 2021 5:21 pm

I don't think anyone has a "matter of trust" with MT. We're just puzzled as to why they would put in the work to provide the Terminal menu function in the Android version, but leave it entirely out of the iOS version.

rextended · Tue Oct 05, 2021 6:19 pm

@jbl42 RouterOS "phone home", on default settings, you do not notice that on your tightly monitored network???

jbl42 · Tue Oct 05, 2021 9:17 pm

Yes of course we know MTs are phoning home. And yes we know they stop doing it after after we configured them.
And our tight monitoring is nothing special or to be proud of. It's just what is mandated in our highly regulated domain. And all of our competitors do the same. Because they have to. Same as we have to. This was actually my point.
Still not sure what point you where trying to make tough.

rextended · Wed Oct 06, 2021 2:14 am

Simply: on default settings, RouterOS "phone home"

creatin · Fri Oct 08, 2021 3:15 pm

scripts are ran through Terminal which is not available on IOS.
Not sure why IOS bans use of Terminal in MT app.
Scripts can be run by clicking the Run Script button. Scripts can be edited in the app also. You don't "need" terminal to run scripts.

I'm using scripts to provide me some data on the screen, like number of connections, free DHCP addresses, etc.
Running them by pressing Run Script button doesn't display data I usually get on the terminal

macsrwe · Fri Oct 08, 2021 6:32 pm

Whenever I have scripts that need to tell me something, I usually do both a :put and a :log warn, because I can never be sure in what environment they're going to be running. I realize in the app, you can't have both the scripts and the log windows open at the same time like you can in Winbox, so that's a bummer. But in a pinch you can get the information you needed.

anav · Thu Dec 30, 2021 12:09 am

Why can I not access the Capac itself via the IPHONE MT APP and MAC ADDRESS of the virtual WLAN.
It does not show under discovered and I can only connect by using IP address and port.
I have double checked all settings and no joy.

mkx · Thu Dec 30, 2021 9:58 am

Do you have local-forwarding set? Do you have the VAP interface listed as allowed interface under /tool mac-server mac-winbox? Do you have VAP interface mentioned in /ip neighbor discovery-settings?

hecatae · Fri Mar 18, 2022 9:20 pm

If I close the app without logging out of any mikrotik, the warning wrong username+ password crops up.

Chupaka · Thu May 26, 2022 1:56 pm

When I try to edit WireGuard peer to change Allowed Address, it fails: not showing current value and tries to comma-separate empty values on editing.
Also, Tx and Rx values greater than 2G are shown negative.

RouterOS 7.2.3

owsugde · Tue Jun 28, 2022 5:40 pm

With the newest iOS app version (1.2.10) I'm being shown the "Secure your router by setting a password" screen with every login to any device.

And yes, I have in fact set passwords other than "admin".

Chupaka · Wed Jun 29, 2022 2:49 pm

In the recent upgrade (Android, App v1.3.23) editing Wireguard's "Allowed Address" was fixed, but Tx and Rx values for Wireguard peers are still negative if greater than 2G in reality.