hi all
im a new user with mikrotik
i just ask about a script and i dont know how to add the script
please help
this is the script on this link
http://forum.mikrotik.com/viewtopic.php?f=9&t=18811
Re: how can i add script
You can add a nuw srcipt in system/script
-
-
khalid engineer
just joined
- Posts: 17
- Joined:
- Location: Iraq
Re: how can i add script
thank you
and i know
but there was a problem with this script
http://forum.mikrotik.com/viewtopic.php?f=9&t=18811
i add the script and i named it speed
and add Scheduler and i wrote in Scheduler in on event speed
and i wrote instead of YOURSUBSCRIBERNAME the name of one of the users
and the script is not work
did i miss something
and what the right procedure to add my script please
http://forum.mikrotik.com/viewtopic.php?f=9&t=18811
regards
khalid
and i know
but there was a problem with this script
http://forum.mikrotik.com/viewtopic.php?f=9&t=18811
i add the script and i named it speed
and add Scheduler and i wrote in Scheduler in on event speed
and i wrote instead of YOURSUBSCRIBERNAME the name of one of the users
and the script is not work
did i miss something
and what the right procedure to add my script please
http://forum.mikrotik.com/viewtopic.php?f=9&t=18811
regards
khalid
Re: how can i add script
Why didn't you post the reply on that topic where I gave you that script?
That way, I would be able to respond immediately on my work.
In the script that I wrote for you, there are two lines like this one:
/tool user-manager user set [/tool user-manager user find user=$i] rate-limit=40k/100k
Change the bold part to user=$user on both lines.
And see if that helps.
-Krige
That way, I would be able to respond immediately on my work.
In the script that I wrote for you, there are two lines like this one:
/tool user-manager user set [/tool user-manager user find user=$i] rate-limit=40k/100k
Change the bold part to user=$user on both lines.
And see if that helps.
-Krige
Re: how can i add script
Also - YOURSUBSCRIBERNAME must not be replaced with one of the users' names.
It must be replaced with the name of a "Customer" from your user manager,
in other words, the Username that you use to log into the User Manager web interface.
Are you using User Manager, or are you entering your Users into PPP/Secrets?
This script is written for User Manager.
-Krige
It must be replaced with the name of a "Customer" from your user manager,
in other words, the Username that you use to log into the User Manager web interface.
Are you using User Manager, or are you entering your Users into PPP/Secrets?
This script is written for User Manager.
-Krige
-
-
khalid engineer
just joined
- Posts: 17
- Joined:
- Location: Iraq
Re: how can i add script
thank u
I'll post the reply on that topic where u gave you that script
i put question there
Thank you for your interest
best regards
I'll post the reply on that topic where u gave you that script
i put question there
Thank you for your interest
best regards
Who is online
Users browsing this forum: No registered users and 17 guests