I HAVE 2 RB133 WITH UBIQUITY XR2 CARDS WITH 16 DBI SECTORIAL ANTENNAS, CONFIGURED AS AP BRIDGE/WDS, SIGNALS ARE -72 TO -78 ON BOTH AP. WHEN I TESTED THEM ON THE BENCH THEY WORKED FINE BUT, NOW THE SEE EACH OTHER BUT THERE IS NO CONNECTION BETWEEN THEM. DISTANCE IS 5 KM 15 METER TOWER IN BOTH PLACES. 2 400MW SENAO RADIOS WERE WORKING IN THIS PLACES BEFORE WITH LETTLE PING TIMEOUTS. PLEASE HELP THANK YOU

Lets see if I uderstand your question. You configured and bench tested your 2 APs and they were working just fine in WDS mode, but now, on the towers, they dont talk to each other? Have you checked interfearance? How about changing the frequency?

THANKS FOR ANSWERING
THATS CORRECT I HAVE TRAYED CHANGING CHANNELS BUT, DOES NOT WORK. THEY SEE EACH OTHER YOU CAN SEE THE SIGNAL LEVEL OF THE OTHER BUT THEY DO NOT LET ANY THING GO THRU. I HAD 2 SENAO WORKING IN THIS CONDITIONS, THEY HAD TIMEOTUS AND I WANTED TO TRY MIKROTIK. I DONT HAVE EXPERIENCE WITH THIS SO I THINK I MAY HAVE SONME WRONG CONFIGURATION. SINASL VARY IN THE -70S
SIGAL TO NOISE IS -13
TX/RX CCQ IS 30S/20S
THANK YOU