I'm trying to configure a Wireguard connection with 7.1beta6 on CCR1009-8G-1S-1S+. But always after adding the Peer it crashes.
The Interface can be configured without issues:
Code: Select all
[admin@MikroTik] > /interface wireguard print
Flags: X - disabled; R - running
0 R name="rbg0" mtu=1420 listen-port=5037 private-key="xxx"
But after adding a Peer it crashes after a few seconds:
Code: Select all
[admin@MikroTik] > /interface wireguard peers add interface=rbg0 endpoint-address=xx.xxx.xxx.xx endpoint-port=51820 persistent-keepalive=25 public-key="xxx" allowed-address=192.168.99.0/24
[admin@MikroTik] > packet_write_wait: Connection to 172.16.90.104 port 22: Broken pipe
It then beeps and I can login again. After Logging in it reports a Kernel failure (and crashes again after a few seconds until I remove the Wireguard peer):
Code: Select all
jan/02/1970 01:00:10 system,error,critical router was rebooted without proper shutdown, probably kernel failure
jan/02/1970 01:00:10 system,error,critical kernel failure in previous boot
