Hi,

just noted - running 7.3.1 on RB1100AHx4 I can´t see temperature anymore using /system/health. Only displays Voltage and current... Is this an error in 7.3.1 or in hardware?

What if you use CLI ?

CLI:

Columns: NAME, VALUE, TYPE
# NAME VALUE TYPE
0 voltage 23.3 V
1 current 0.4 A
2 psu1-voltage 24 V
3 psu2-voltage 0 V

This is not what the command /system health print outputs...

[epkulse@MikroTik-1100] /system> health print
Columns: NAME, VALUE, TYPE
# NAME VALUE TYPE
0 voltage 23.3 V
1 current 0.4 A
2 psu1-voltage 24 V
3 psu2-voltage 0 V

ok, v6 does not show numbers 0,1,2,3 etc when printing /system health, so that got me confused...

Support answered that this is a recorded issue for this router and will be corrected in future ROS upgrade.

It is almost incredible that after 6 months this issue is still unsolved, can we get an expected resolution date?