hi all:

i have a RB532Ar5 with RoS 2.9.4x (i don't remember the RoS exact version right now), in this equipment i have the next wireless configuration (working config)...

Wlan1 (Xr5) = Station WDS with default bridge bridge1
Wlan2 (SR2) = AP bridge with no WDS (their clients do not support WDS {Teletronics EZbridge + Ubiquity Powerstation2(not WDS Mode)}

Bridge1 contains =Ether1 + wlan1 + wlan2

now i am trying to move this config to a RB333 with RoS 3.0RC4, but when i am trying to add a wlanX to a bridged port, ths is marked as a disabled bridge port and the "fordward" status is "no".

i've got this on terminal console:
[admin@MikroTik] /interface bridge port> print
Flags: X - disabled, I - inactive, D - dynamic
# INTERFACE BRIDGE PRIORITY PATH-COST
0 ether1 bridge1 0x80 10
1 I wlan2 bridge1 0x80 10
2 I wlan1 bridge1 0x80 10

what can i do to make it work like the RB532 wirking config??
is this normal???
i wold appreciate very much your help...

thanks!!