/ip/address/print where interface=bridge
Columns: ADDRESS, NETWORK, INTERFACE
# ADDRESS NETWORK INTERFACE
;;; defconf
0 10.10.50.10/24 10.10.50.0 bridge

/ipv6/address/print where interface=bridge
Flags: D - DYNAMIC; G, L - LINK-LOCAL
Columns: ADDRESS, FROM-POOL, INTERFACE, ADVERTISE
# ADDRESS FROM-POOL INTERFACE ADVERTISE
0 G fd50::50/64 pool-ipv6 bridge yes
1 DL fe80::6e3b:6bff:feb7:1f78/64 bridge no

/routing bgp template
add address-families=ip,ipv6 as=65150 disabled=no input.filter=in-home name=template-home \
nexthop-choice=force-self output.filter-chain=notexport_wg_helpers_nets router-id=10.10.88.50 routing-table=main

/routing bgp connection
add address-families=ip,ipv6 as=65150 disabled=no hold-time=3m input.filter=in-home keepalive-time=1m20s local.role=ebgp name=\
bgp-home nexthop-choice=default output.filter-chain=notexport_wg_helpers_nets .redistribute=connected remote.address=\
10.10.150.10/32 .as=65001 router-id=10.10.88.50 routing-table=main templates=template-home

/routing filter rule
add chain=in-home disabled=no rule="if (dst == 0.0.0.0/0) {\r\
\n reject\r\
\n} else {\r\
\n accept\r\
\n}"

add chain=notexport_wg_helpers_nets disabled=no rule="if (dst == 0.0.0.0/0 or dst == 10.10.88.48/30 or dst == 10.10.150.8/30 or \
\r\
\n (bgp-input-remote-addr != 10.10.88.49 and bgp-input-remote-addr != 10.10.150.50) or\r\
\n dst == ::/0) {\r\
\n reject\r\
\n} else {\r\
\n accept\r\
\n}"