Hello Everyone,
Is there are any plans add l2vpn-evpn family in BGP advertisement, that for VXLAN or router reflector for EVPN.

There are 3 things I think would round out the routing stack for MikroTik after they get ROSv7 stable and look at new features

1. IS-IS
2. EVPN
3. SR-MPLS w/ TI-LFA

There are 3 things I think would round out the routing stack for MikroTik after they get ROSv7 stable and look at new features

1. IS-IS
2. EVPN
3. SR-MPLS w/ TI-LFA

I would like to add vpnv6 address family to the list.

.+1

+2500 site routers. Let's do it!

1.IS-IS
2. EVPN
3. SR-MPLS w/ TI-LFA

+1


1.IS-IS
2. EVPN
3. SR-MPLS w/ TI-LFA

+1

1.IS-IS
2. EVPN
3. SR-MPLS w/ TI-LFA

+1

1. EVPN
2. IS-IS
3. SR-MPLS w/ TI-LFA

+1

1. EVPN

+1

EVPN

+1 for EVPN here as well.

There is an RFC for this: https://datatracker.ietf.org/doc/html/rfc9136

/Martin

So there is now EVPN still?

So there is now EVPN still?

Not yet.....

Maybe soon

So there is now EVPN still?

Not yet.....

Maybe soon

Damn and I was migrating from RouterOS v6 to v7 because I thought that where VXLAN there should also be control plane EVPN to connect my proxmox SDN using its evpn controller setting peer to MikroTik :/ I had to use BGP instead. How working without knowledge can be irritating

As side note I added in lab ISIS to the mix from cli. So far so good.
Step 1 DONE.


Thank you.

I would like to see the implementation of vxlan/evpn already in 2025y

+1

...but are there MT devices with ASICs that can handle VXLAN TEPs in hardware?

There is, the high-end ones has the hardware. But no support implemented yet.