AP-CONFIG---HELP

goddy · Fri Mar 25, 2005 6:35 pm

Hi,

I still can input my license key.Let me tell you about my setup.may be there is something wrong.

I have server and its sharing(internet-IP 192.168.0.1).I downloader the router OS and runing on a dedicated pc with 2 network cards, the IP's-ether1 10.1.0.1
ether2 192.168.0.60

Now I can use Winbox to access the dedicated pc with the IP 192.168.0.60.

my problem is:

1.when I input my license,it tells me "could not change the key-invalid key"

2. am trying to setup AP(access point) but it tells me thet is no wireless interface

3.my ISP's gateway is a privite Ip and when I config,it says unknown

4.how do I config,am using(2.4 intergated Access point + a backbone(rb/om19)

Best Reguards

Goddy

randyloveless · Fri Mar 25, 2005 9:29 pm

first of all. if you dont have a wireless card in the MT it cannot setup AP..

2nd - what are the specific ip addresses you need on the MT

you stated nic 1 and nic 2 main ip address. what is your ISP ip address that you are trying to connect to . this is the reason for the UNKNOW interface you stated. it does not know where the ip address you are adding needs to go . ie what interface it should goto

Randy

goddy · Fri Mar 25, 2005 10:48 pm

1.its a new one i bought from mt and the is a wireless card

2.the ip address i need is 10.1.0.1

3. my ISP ip is 172.19.198.66 and or 192.168.0.1(windows sharing)

randyloveless · Fri Mar 25, 2005 11:41 pm

1.its a new one i bought from mt and the is a wireless card
what card is it

2.the ip address i need is 10.1.0.1
ok which nic is this on

3. my ISP ip is 172.19.198.66 and or 192.168.0.1(windows sharing)
what is your ip address on your ISP

goddy · Sat Mar 26, 2005 11:07 am

1.the card is Atheros

2.Nic- ether1

3.isp ip-172.19.198.66

djape · Sat Mar 26, 2005 11:25 am

So, did ISP gave you IP address to setup?
Which one they gave you 192.168.0.x or 172.19.198.x?
Also, I have witnessed that some older motherboards doesn't see wireless interfaces!
Some can see few cards and some not even one!
Anyhow, if you installed MT on another hard disk then the one you reported to MT your license key will not be valid...

Cheers...

goddy · Sat Mar 26, 2005 12:11 pm

isp- IP-172.19.198.66

NOTE.

Am new in this,but correct me if am wrong,I download the additional packages and uploaded it but b'cos my license is invalid its not allowing me?

when I do /file print, I see all the packeges but when I issue /system package print, I dont see the package I uploaded.

I hava had about three different license but all not valid

lastguru · Sat Mar 26, 2005 12:53 pm

reboot the router after you have uploaded the packages

goddy · Sat Mar 26, 2005 1:09 pm

I HAVE DONE THAT BRO,

DONT YOU THINK B'COS OF THE LICENSE?

sten · Mon Mar 28, 2005 4:09 pm

License is bound to harddrive/flashcard. support@mikrotik.com should help you regarding a license issue.

AP-CONFIG---HELP

AP-CONFIG---HELP

specifications