print specific value from command output

cicserver · Mon Sep 14, 2015 1:03 pm

how can i get specific value only from the command ?
Example i want to get only IP address of radius server from this command
/radius print

admin@TEST] > rad print 
Flags: X - disabled 
 #   SERVICE              CALLED-ID             DOMAIN             ADDRESS                                             SECRET            
 0   ;;; radius
     ppp                                                           1.2.3.4                                     radsecret

i want to print value of 1.2.3.4 only. (actually ip changes frequently so i want a command to get the ip)

aacable · Mon Sep 14, 2015 1:16 pm

Try following

:put [get 0 value-name=address]

It will print the value 1.2.3.4 only. (considering you have only single radius configured and its value is 0, other wise if you have multi radius mentioned you can use the number like 1,2,3, etc accordingly)

print specific value from command output

print specific value from command output

Re: print specific value from command output

Who is online