Community discussions

MikroTik App
 
waver
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Thu May 02, 2013 2:19 pm

Update RB1100 impossible

Tue Oct 20, 2015 1:30 pm

Hi to all,

I have problems with RB1100: When i copy the new *.npk file and reboot the system, the RB no apply any changes on the system.

To ensure the file is correct i tried to update from "system/package" and found the same problem.

I see 0.6% bad blocks :? on resources...

I try with 6.32.2 and 6.32.3. The current firmware installed is 6.31.




Thanks,
 
InoX
Forum Guru
Forum Guru
Posts: 1966
Joined: Tue Jan 09, 2007 6:44 pm

Re: Update RB1100 impossible

Tue Oct 20, 2015 2:43 pm

Check the log after failed upgrade.
Also, you can upgrade from system>packages>check for updates
 
kristaps
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Jan 27, 2014 1:37 pm

Re: Update RB1100 impossible

Tue Oct 20, 2015 3:26 pm

We tried replica on RB1100 but our device started just fine with 6.32.3 version.

Could you send supout after failed upgrade to support@mikrotik.com


Exporting configuration http://wiki.mikrotik.com/wiki/Manual:Co ... figuration and reinstalling should help.
 
waver
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Thu May 02, 2013 2:19 pm

Re: Update RB1100 impossible

Tue Oct 20, 2015 5:15 pm

Finally,

After every days with the problem i could update de RB without any special action... I tried to reboot and after few seconds, when i log in i see the new version.

I show the log after reboot:



Thanks for the support.
You do not have the required permissions to view the files attached to this post.