Community discussions

MikroTik App
 
megamuz
newbie
Topic Author
Posts: 30
Joined: Mon May 19, 2014 2:23 pm
Location: Russia

RB1100AHx2 VLAN not work (

Thu Dec 10, 2015 7:05 am

hi, my config:
/interface vlan
add interface=LAN-bridge l2mtu=1594 name=vlan15 vlan-id=15
add interface=ISP_loopback l2mtu=65531 name=vlan21 vlan-id=21

/ip pool
add name=VPN-DHCP ranges=192.168.70.30-192.168.70.50
add name=PPTP ranges=192.168.71.40-192.168.71.79
add name=VLAN-POOL ranges=192.168.211.10-192.168.211.20
/ip dhcp-server
add add-arp=yes address-pool=VLAN-POOL always-broadcast=yes disabled=no interface=vlan15 lease-time=1w name=server1

/interface bridge
add name=EoIP-bridge
add name=ISP_loopback
add name=LAN-bridge
add name=WAN-bridge

/interface bridge port
add bridge=LAN-bridge interface=ether3
add bridge=LAN-bridge interface=ether6
add bridge=EoIP-bridge interface=EoIP-ID1_SKH-MSK
add bridge=EoIP-bridge interface=EoIP-ID3_MSK-CPK
add bridge=EoIP-bridge interface=EoIP-ID4_MSK-YML
add bridge=EoIP-bridge interface=EoIP-ID215_megamuz-MSK
add bridge=WAN-bridge interface=ether2-ISP-reserve
add bridge=WAN-bridge interface=ether1-GW-TTK
add bridge=LAN-bridge interface=ether4
add bridge=LAN-bridge interface=ether5
add bridge=LAN-bridge interface=ether7
add bridge=LAN-bridge interface=ether8
add bridge=LAN-bridge interface=ether9
add bridge=LAN-bridge interface=ether10
add bridge=LAN-bridge interface=vlan21
i configure Hyper-V network on VLAN ID=15 (my PC = ether5 ) is not work (
and my home 951ui router it's ok.

Who is online

Users browsing this forum: oatis and 54 guests