MikroTik

Hello,

I just launched brand new SXT LTE (little beauty ), upgraded to 6.33.5, set some basic settings and two default static routes (backup internet links). All worked perfectly (speedtest 80/30Mb) until I moved device to new location (restart).

After restart traffic on LTE interface dropped to '0'. I found that distance for LTE interface default route (0.0.0.0/0) is automatically set to 188. My default static routes distances were set to 2 and 3 thus one of these were used as defaut route.

Default Route Distance in LTE interface config is set to 1. Why it sets automatically to 188?

a bug? or maybe a classless route issue? What happens if you disable add default route an add a static default gw through the wan device?

Enable logging to debug it anyway...

Thanks, I will do some testing in the evening. Now just two screenshots.
I temporarily set distance of my backup links to 190 and 191.

It looks like a bug. After 'Reset Configuration' and checking Add Default Route, route appears with distance=188.

In addition default-configuration script also fails to run on SXT LTE.... check this topic: http://forum.mikrotik.com/viewtopic.php ... 80#p516138

EDIT:

I tried two other releases.

1) v6.34rc36
Default Route Distance set automatically to 136 ?!? (wrong)
default-configuration scripts doesn't work (wrong)

2) v6.32.3
Default Route Distance set automatically to 1 (CORRECT!)
default-configuration scripts work fine (CORRECT!)