Hi,

I am working on a test Environment, with MPLS/VPLS configuration between 2xCCR 1036, all ports are set to support L2MTU=1600, and everything is working perfect until I started to add a Bonding interface between the CCR and a Cisco Switch, to Increase capacity, on the Cisco Side all interfaces MTU is set to 1600, and the Etherchannel as well is set to 1600, but on the Bonding interface I can't set the L2MTU = 1600, due to that packets is being fragmented.

any other solution to bridge 2 ethernets with high L2MTU size

will Mirkotik add this feature to the Bonding interface?

# NAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU MAC-ADDRESS
16 X bonding1 bond 1500


Regards,