MikroTik

Hi,

I am trying to link a UPS to an RB112 but cannot set the port speed. I remove the serial console but still the settings cannot be changed. Also after a reboot the console comes back!!

I can do this with the RB532 no problem so it must be related to the RB112. I don't know if this is a RouterOS or firmware issue but its a right pain in the ass!!

Anyone got the UPS package working with the 112?

Malcolm

Ah, good one. Haven't tried on my 112s but I've never been able to use the console port for a UPS. Maybe try a script to change after boot?

Anyone managed to set the port speed in Winbox on an RB112?

Malcolm

I still can not set the port baud rate on the RB112
I am able to do in on the RB532, but not the 112.
I need it set to 4800 baud.
/port set serial0 baud-rate=4800

Anyone? - RouterBoard, MikroTik?

'/ port' configuration modification for RB100 is possible only at 3.0 version (not 2.9)

'/ port' configuration modification for RB100 is possible only at 3.0 version (not 2.9)

On a somewhat related note, any plans for serial port in v3 to allow ad hoc sending/receiving of characters via scripting, etc? This would be a massively useful feature for instrumentation of sites, construction of installer tools...

What kind of bribe would it take to get this?