Mark Local Traffic on Specific Route.
Posted: Thu Mar 03, 2016 9:41 am
HI,
These are ips which are using by me. I am using RB 750 GL router board. I want to transfer my local IP to only access WAN2. Or WAN2 + WAN3. Please some one guide me in this matter.
192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local
192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1
192.168.2.2/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2
192.168.3.2/24 network=192.168.3.0 broadcast=192.168.3.255 interface=WAN3
These are ips which are using by me. I am using RB 750 GL router board. I want to transfer my local IP to only access WAN2. Or WAN2 + WAN3. Please some one guide me in this matter.
192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local
192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=WAN1
192.168.2.2/24 network=192.168.2.0 broadcast=192.168.2.255 interface=WAN2
192.168.3.2/24 network=192.168.3.0 broadcast=192.168.3.255 interface=WAN3