Router Bricked in under 5 minutes.

Phantomewzick · Tue Mar 15, 2016 11:47 pm

Hello, I have just gotten my first mikrotik, an RB2011.

Edit for cleanup: Did some stuff, messed it up, Netinstalled it successfully, but now I cant get to the webfig page to actually set it up, wat do?

Edit2: All Fixed up thanks to Dark and SOB's simple but effective suggestions, not sure how to mark the topic resolved, if a mod happens by and could do that would be awesome, and again, Thanks Everyone.

darkprocess · Wed Mar 16, 2016 12:06 am

Netinstall it. The procedure is in the wiki

Phantomewzick · Wed Mar 16, 2016 1:13 am

Thanks Dark,

I got it netinstalled, but I still cant get to the webfig page, does the netinstall change the address or something?

Sob · Wed Mar 16, 2016 3:39 am

WinBox is your friend. It doesn't require IP address and can connect directly to MAC.

Phantomewzick · Wed Mar 16, 2016 3:51 am

THANK YOU SOB!

I already had Winbox but until you told me I had no idea about the mac address thing, I am now up and running.

Thanks again Everyone!

kzla · Wed Mar 16, 2016 8:11 am

Netinstalling would put you into IP addressed with interface = 0.0.0.0

Download Winbox
Connect LAN wire in Eth3 port
Connect to Router using its MAC in the neighbour's tab

IP > Addresses > Assign a manual ip in the first field like 192.168.1.1/24 and select the ethernet port you are connected to currently ( For here it Eth3)

Now open you pc's network settings Give it network address > 192.168.1.2 Subnet : 255.255.255.0 Gateway : 192.168.1.1

DNS : 8.8.8.8 and 8.8.4.4

Now try opening 192.168.1.1 .. It will open for sure

Cheers