MikroTik

Hi Forum
I've got a CCR1009-8G-1S-1S+PS running, but having a strange experience.

I've created 2 DCHP Pools - (LAN/DMZ) but experience the problem - at my "hosts" are not taking the reserved IP address in the LAN pool.

I've created 20 host where only 8 are getting the rigth IP - as created a static IP for this PC.
Whats happening here ?
The only differencce in my head - Is that my Linux Machine get the static IP - but not the accesspoints, RaspberryPi (XBMC) etc - my leasetime is 10min.

My procedure:
When getting a dynamic IP - dbclick on the host - pressing make it static.
Then open the static and changing the IP to the wanted IP - and press apply.
Removeing the dynamic IP - butthen its just getting another IP instead of the newly created static IP. So what am I doing wrong here ???

ROS Version? Firmware version?

Post an export:

I've found out - that the network ID not MAC adresse - should be correct - you cannot give a new name to that identifier.

# mar/27/2016 10:38:38 by RouterOS 6.34.3
# software id = MU8X-YJR2
#

Not sure if you fixed it, the export is empty...