Winbox doen`t works correctly

harpo · Thu Sep 07, 2006 12:00 pm

Hello

I have a problem with winbox software.
The routerboard is a 532 with a 8602 radio 400mW.
I run the winbox.exe and i can connect to the routerboard 532, but some functions are disable.
Ej: I put an ip address to the bridge and reboot. After, I connect via winbox but I cannot see the ip address or I cannot see the ports and I cannot add the ports to the bridge....

Than you very much...

Thu Sep 07, 2006 4:03 pm

1) Use the latest Winbox version. The latest Winbox version is available on http://demo2.mt.lv

2) Make sure that used login has enough permissions.

GotNet · Thu Sep 07, 2006 5:35 pm

In your example, you will loose connection to the MT as the bridge is not assigned ports yet. Best to do the basic intial config with serial terminal.

I don't know for sure about the 532, but other routerboards I use have most of the packages disabled out of the box. Check system/package to see...

harpo · Fri Sep 22, 2006 12:01 pm

The rb 532 software is 2.9.30 and all packages are active.
However, I only can to configure the rb if I´m connected in the same switch. The options are disabled and I cannot to configure any option.
I´m really desperate...

Thanks

balimore · Fri Sep 22, 2006 1:19 pm

The rb 532 software is 2.9.30 and all packages are active.
However, I only can to configure the rb if I´m connected in the same switch. The options are disabled and I cannot to configure any option.
I´m really desperate...

Thanks

---
Hello Harpo,

Can you try connect to your router with MAC-Winbox in v2.10 [v2.9.30] is available.

regards
Hasbullah.com
---

harpo · Fri Sep 22, 2006 2:14 pm

Hi Balimore

The rb software is v2.9.30 and I`m connecting throught the lastest winbox version. The problem is the same.
Now, I connect via winbox(port 20561) and the problem is the same.
But, if I connect throught dude with winbox (port 8291) the problem is resolute. In this manner it`s working correctly.

Thanks...