MikroTik

Currently I created a hotspot on VLAN10. The address pool for this is 192.168.10.2-192.168.10.254. How can I increase/add more address pool to this hotspot? For example if all IP addresses in the above range is occupied then new IP can be assigned from the pool 192.168.2.2-192.168.3.254 or 192.168.4.2-192.168.4.254 or 192.168.100.2-192.168.100.254 so that there can be more than 252 users on the network at a time.

Any help will be appreciated.

Hello
you can use more ip address in ip pool but you should use bigger subnet

Hello
you can use more ip address in ip pool but you should use bigger subnet

Are you sure increasing subnet will work?