Page 1 of 1
Can't connect between 2 subnet in 2 eth
Posted: Mon Apr 25, 2016 4:13 pm
by trangtrau
Hi every one !
I have 2 ethernet with
- eth1 ip= 192.168.0.1/24
- eth2 ip =192.168.2.1/24
and cable form 2 ethenet put in to 2 othe switch. How to do for them see itself. Sorry for bad english
Re: Can't connect between 2 subnet in 2 eth
Posted: Mon Apr 25, 2016 8:50 pm
by Mazutti
Hi every one !
I have 2 ethernet with
- eth1 ip= 192.168.0.1/24
- eth2 ip =192.168.2.1/24
and cable form 2 ethenet put in to 2 othe switch. How to do for them see itself. Sorry for bad english
If your router is gateway to both networks and firewall is not configured to drop connections between them, then it should work ok. Easy way to find out is disabling all Firewall/Filter rules, if it works, then some rule is blocking that traffic.
Re: Can't connect between 2 subnet in 2 eth
Posted: Tue Apr 26, 2016 11:24 am
by trangtrau
i has disabled all ruler but nothing change.
Re: Can't connect between 2 subnet in 2 eth
Posted: Tue Apr 26, 2016 12:39 pm
by blajah
Are ports eth1 and eth2 in same bridge ?
Re: Can't connect between 2 subnet in 2 eth
Posted: Tue Apr 26, 2016 3:43 pm
by kiaunel
Post your config here. Use export commnad:
Re: Can't connect between 2 subnet in 2 eth
Posted: Tue Apr 26, 2016 8:33 pm
by blajah
One more thing, consider proxy-arp .