MikroTik

It seems like a lot of people may need this, so I am surprised it doesn't exist. I'm in the process of building a full list of channels that I can bring in to caps man.... E.g. 2.4Ghz Channel 1, Channel 2, Channel 3, etc....

Does anyone know if this exists or if I have to build in manually. If I wind up building it I'll post it here... but it just seems that it should exist already.

Quick-N-Dirty List for 2,4 GHZ:
/caps-man channel add band=2ghz-b/g/n name=CH1 frequency=2412
/caps-man channel add band=2ghz-b/g/n name=CH2 frequency=2417
/caps-man channel add band=2ghz-b/g/n name=CH3 frequency=2422
/caps-man channel add band=2ghz-b/g/n name=CH4 frequency=2427
/caps-man channel add band=2ghz-b/g/n name=CH5 frequency=2432
/caps-man channel add band=2ghz-b/g/n name=CH6 frequency=2437
/caps-man channel add band=2ghz-b/g/n name=CH7 frequency=2442
/caps-man channel add band=2ghz-b/g/n name=CH8 frequency=2447
/caps-man channel add band=2ghz-b/g/n name=CH9 frequency=2452
/caps-man channel add band=2ghz-b/g/n name=CH10 frequency=2457
/caps-man channel add band=2ghz-b/g/n name=CH11 frequency=2462
/caps-man channel add band=2ghz-b/g/n name=CH12 frequency=2467
/caps-man channel add band=2ghz-b/g/n name=CH13 frequency=2472

5Ghz:
/caps-man channel add band=5ghz-a/n/ac name=CH36 frequency=5180
/caps-man channel add band=5ghz-a/n/ac name=CH40 frequency=5200
/caps-man channel add band=5ghz-a/n/ac name=CH44 frequency=5220
/caps-man channel add band=5ghz-a/n/ac name=CH48 frequency=5240
/caps-man channel add band=5ghz-a/n/ac name=CH52 frequency=5260
/caps-man channel add band=5ghz-a/n/ac name=CH56 frequency=5280
/caps-man channel add band=5ghz-a/n/ac name=CH60 frequency=5300
/caps-man channel add band=5ghz-a/n/ac name=CH64 frequency=5320
/caps-man channel add band=5ghz-a/n/ac name=CH100 frequency=5500
/caps-man channel add band=5ghz-a/n/ac name=CH104 frequency=5520
/caps-man channel add band=5ghz-a/n/ac name=CH108 frequency=5540
/caps-man channel add band=5ghz-a/n/ac name=CH112 frequency=5560
/caps-man channel add band=5ghz-a/n/ac name=CH116 frequency=5580
/caps-man channel add band=5ghz-a/n/ac name=CH120 frequency=5600
/caps-man channel add band=5ghz-a/n/ac name=CH124 frequency=5620
/caps-man channel add band=5ghz-a/n/ac name=CH128 frequency=5640
/caps-man channel add band=5ghz-a/n/ac name=CH132 frequency=5660
/caps-man channel add band=5ghz-a/n/ac name=CH136 frequency=5680
/caps-man channel add band=5ghz-a/n/ac name=CH140 frequency=5700
/caps-man channel add band=5ghz-a/n/ac name=CH149 frequency=5745
/caps-man channel add band=5ghz-a/n/ac name=CH153 frequency=5765
/caps-man channel add band=5ghz-a/n/ac name=CH157 frequency=5785
/caps-man channel add band=5ghz-a/n/ac name=CH161 frequency=5805
/caps-man channel add band=5ghz-a/n/ac name=CH165 frequency=5825

Awesome... thanks...

I think I'm going to take those and add the extension channels also... I'll post back when I do.

Any difference between

/caps-man channel add band=5ghz-a/n/ac name=Channel48-40Mhz frequency=5180 extension-channel=Ceee width=80
/caps-man channel add band=5ghz-a/n/ac name=Channel48-40Mhz frequency=5240 extension-channel=eeeC width=80

Basically does it matter where the extension/main channel are in terms of its use?

Hi,
afaik:
Ceee => Center Frequency + 3 extensions "upwards" => 5180 (center) +20 + 20 + 20 (Extensions)

So it should not make any difference in that Setting (other than my opinion "ceee" is nicer to see and calculate)

I suppose my question is in theory you could write a 80 Mhz channel several ways.... Ceee eCee eeCe eeeC .... so does it matter which?.... Or are the all the same?

im currently using
in hopes to get ac... is this the correct way?

its quite misleading. should we use 80mhz or..... 20+ Ceee or 80 + Ceee

please enlighten.