Community discussions

MikroTik App
  4. RouterOS
  5. Wireless Networking

Having trouble setting up capstan v2 with new wAP ac / ros 6.35.2

Post Reply
 
unizhu
just joined
Topic Author
Posts: 7
Joined: Sat May 21, 2016 11:41 am

Having trouble setting up capstan v2 with new wAP ac / ros 6.35.2

Sat May 21, 2016 6:39 pm

Router - RB850Gx2 - ros 6.35.2
AP1 - wAP ac - ros 6.35.2
AP2 - wAP ac - ros 6.35.2

wireless - cm2 6.35.2
testing on AP2 - 2.4GHz

I cannot find the ssid I defined.
log error: sometime shows: 4-way handshake timeout on router.

router settings:
Screen Shot 2016-05-21 at 11.21.48 PM.png
Code: Select all
[admin@MikroTik-Router] > caps-man interface print
Flags: M - master, D - dynamic, B - bound, 
X - disabled, I - inactive, R - running 
 #      NAME                  RADIO-MAC         MASTER-INTERFACE                 
 0 M  XI CAP-AP1-2.4G          E4:8D:8C:4B:27:73 none                             
 1 M B  CAP-AP2-2.4G          E4:8D:8C:72:C8:49 none                             
 2 M  XI CAP-AP2-5G            E4:8D:8C:72:C8:48 none
Code: Select all
[admin@MikroTik-Router] > caps-man provisioning print
Flags: X - disabled 
 0   radio-mac=E4:8D:8C:4B:27:73 hw-supported-modes="" identity-regexp="" common-name-regexp="" 
     ip-address-ranges="" action=create-dynamic-enabled master-configuration=2.4G 
     slave-configurations="" name-format=cap name-prefix="2.4G-APs" 

 1   radio-mac=E4:8D:8C:72:C8:49 hw-supported-modes="" identity-regexp="" common-name-regexp="" 
     ip-address-ranges="" action=create-dynamic-enabled master-configuration=2.4G 
     slave-configurations="" name-format=cap name-prefix=""
Code: Select all
[admin@MikroTik-Router] > caps-man configuration print  
 0 name="2.4G" mode=ap ssid="UNI-MikroTik" country=china security=WAP2-AES 
   datapath.bridge=bridge-local channel=2.4GHz
Code: Select all

[admin@MikroTik-Router] > caps-man channel print 
 0 name="2.4GHz" band=2ghz-onlyn
Code: Select all

[admin@MikroTik-Router] > caps-man security print
 0 name="WAP2-AES" authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm 
   passphrase="password"
NO ACL.
Code: Select all

[admin@MikroTik-Router] > caps-man remote-cap print
 # ADDRESS                                                     NAME        STATE            RADIOS
 0 E4:8D:8C:72:C8:47/55454                                     CAP-E48D... Run                   1
Code: Select all

[admin@MikroTik-Router] > caps-man radio print
Flags: L - local, P - provisioned 
 #    RADIO-MAC         INTERFACE               REMOTE-CAP-NAME              REMOTE-CAP-IDENTITY             
 0  P E4:8D:8C:72:C8:49 CAP-AP2-2.4G            CAP-E48D8C72C847             MikroTik-AP2
No registration table.




On wAP ac
Screen Shot 2016-05-21 at 11.22.59 PM.png
Screen Shot 2016-05-21 at 11.20.27 PM.png
Code: Select all

[admin@MikroTik-AP2] /interface wireless> print 
Flags: X - disabled, R - running 
 0  R ;;; managed by CAPsMAN
      ;;; channel: 2442/20-Ce/gn(20dBm), SSID: UNI-MikroTik, local forwarding
      name="wlan1" mtu=1500 l2mtu=1600 mac-address=00:00:00:00:00:00 
      arp=enabled interface-type=Atheros AR9300 mode=ap-bridge 
      ssid="UNI-MikroTik" frequency=auto band=2ghz-onlyn 
      channel-width=20/40mhz-Ce scan-list=default wireless-protocol=any 
      vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none 
      wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes 
      default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 
      hide-ssid=no security-profile=default compression=no
I googled and searched this forum however still cannot solve this problem.

anyone can help?
You do not have the required permissions to view the files attached to this post.
Top
 
TonyJr
Member Candidate
Member Candidate
Posts: 207
Joined: Sat Nov 12, 2011 1:30 am
Location: UK
Contact:
Contact TonyJr

Re: Having trouble setting up capstan v2 with new wAP ac / ros 6.35.2

Mon May 30, 2016 6:43 pm

Hmm. Have you tried clearing the CAPs and CAPsMAN configuration and starting from scratch, then slowly add each configuration until you get the error? If you have upgraded, sometimes the previous configuration is not liked by the newer packages etc.. Also, try using the new wireless-rep packages on both before trying what I said above as this may solve it.

Hope this helps,

TonyJr
Top
 
Dude
just joined
Posts: 9
Joined: Wed Nov 19, 2014 2:25 pm

Re: Having trouble setting up capstan v2 with new wAP ac / ros 6.35.2

Thu Sep 01, 2016 10:43 pm

Same problem! ROS 6.34.6 bugfix. CAPsMAN RB2011iL-IN + 2x wAP ac. On WLAN 5GHz - NO PROBLEMS! On 2GHz - we have 2 errors in log:
1) disconnected, 4-way handshake timeout
2) disconnected, received disassoc unspecified

OMG! WTF!
Top
Post Reply
  4. RouterOS
  5. Wireless Networking