MikroTik

Hi,
I have internet connection from 2 ISP (not same company), i will use eth1 for ISP 1 and eth2 for ISP 2. Both will get public IP Address, because the 1st ISP using cable modem and 2nd ISP using PPPoE Client.

My LAN SubNet is 192.168.1.0 /24, the 192.168.1.1 /24 is the MikroTik as internet gateway.

I want to configure these IP:
192.168.1.20, 192.168.1.21, 192.168.1.90, 192.168.1.95, etc will using internet connection from ISP 1
182.168.1.11, 192.168.1.200, etc will using internet connection from ISP 2

I use RouterOS v5.24 on RB750

Do you have any idea how to do it? Thanks!

Best Regards,
Yudi

first of all, upgrade your RouterOS to latest version

you need to create a routing table for each of your ISP link then mark routing based on the source ip (LAN) and destination (not LAN).