Page 1 of 1
UBNT AP monitoring using Dude
Posted: Sun Jul 03, 2016 6:36 pm
by p4rv33n
Hi all,
I monitoring cisco switch that is directly connected to Dude server installed on CCR1009. But an UBNT wireless device connected to eth-10 of Cisco switch.
Dude client showing only Cisco switch details but not showing anything for UBNT wireless device. From some forum help I am able add Ethernet port monitoring using probe.
After long try I am not able to monitor anything for UBNT AP.
Kindly help me how can I do for UBNT (SNMP agent is enabled)
Re: UBNT AP monitoring using Dude
Posted: Mon Jul 04, 2016 12:37 pm
by p4rv33n
Please help, I really need this as maximum devices is behind that Cisco switch so which i need to monitor.
Re: UBNT AP monitoring using Dude
Posted: Wed Jul 06, 2016 12:29 am
by kmok1
Under the Settings option of your Ubnt device, under its Services tab, use ping and/or http. There is nothing in Dude to monitor my Airfiber's wlan or lan port.
Re: UBNT AP monitoring using Dude
Posted: Wed Jul 06, 2016 11:49 am
by krisjanis
Did you upload UBNT mib to your dude server?
Re: UBNT AP monitoring using Dude
Posted: Wed Jul 06, 2016 7:09 pm
by p4rv33n
Did you upload UBNT mib to your dude server?
How can I do this , I am new to this?
Re: UBNT AP monitoring using Dude
Posted: Wed Jul 06, 2016 10:08 pm
by kmok1
The UBNT-MIB file is at the bottom of this page.
https://help.ubnt.com/hc/en-us/articles ... -Test-SNMP
I added those ubnt files to Files/mibs folder.
Afterward, in my ubnt object, I am able to pull info via snmp walk, but it is in table form. Do you have instructions on how to present this in Dude's Network Maps?
Re: UBNT AP monitoring using Dude
Posted: Thu Jul 07, 2016 1:21 am
by p4rv33n
The UBNT-MIB file is at the bottom of this page.
https://help.ubnt.com/hc/en-us/articles ... -Test-SNMP
I added those ubnt files to Files/mibs folder.
Afterward, in my ubnt object, I am able to pull info via snmp walk, but it is in table form. Do you have instructions on how to present this in Dude's Network Maps?
If you share this also, that would be more helpful...Thanks
Re: UBNT AP monitoring using Dude
Posted: Wed Jul 13, 2016 9:41 am
by SimonK
we are also running Thedude, we are montering UBNT AP's.
In the network map i can see how clients which are connected to the AP's
also pulling AP name, IP, AP model, location and so on
please let me know if this is what you guys want
Re: UBNT AP monitoring using Dude
Posted: Wed Aug 03, 2016 3:08 pm
by p4rv33n
we are also running Thedude, we are montering UBNT AP's.
In the network map i can see how clients which are connected to the AP's
also pulling AP name, IP, AP model, location and so on
please let me know if this is what you guys want
Yes , yes that's what I am looking for but in addition AP signal strength need to be monitor.
I am giving AP's different subnet mask and IP other then dude IP series. Is that the problem?
Please share your implementation as it will help me so much.
Re: UBNT AP monitoring using Dude
Posted: Sun Aug 28, 2016 11:52 am
by SimonK
Hi,
this is what i use in TheDUDE on UBNT AirMAX APS
[oid("1.3.6.1.2.1.1.5.0")]
[Device.FirstAddress]
[oid("1.2.840.10036.3.1.2.1.3.5")]
[oid("1.3.6.1.2.1.1.6.0")]
Users Online:[oid("1.3.6.1.4.1.41112.1.4.5.1.15.1")]
insert in apperance