Code: Select all
> system leds print
Flags: X - disabled, * - default
# TYPE INTERFACE LEDS
0 * wireless-status wlan wlan-ledDissapeared leds in /system leds. Done
Recently, I discovered that there are only wlan-led and user-led in /system leds. Frimware update 6.35.2->6.35.4->6.36 did not change anything.
What can i do to come they back?
You do not have the required permissions to view the files attached to this post.
Last edited by csr on Thu Jul 21, 2016 5:51 pm, edited 1 time in total.
Re: Dissapeared leds in /system leds
RB951G-2HnD has had two configurable LEDs (wlan-led and user-led) from beginning. Ethernet port LEDs on RB951G-2HnD are hardcoded in Gigabit Ethernet switch-chip and are non-configurable.
RB951Ui-2HnD has internal Fast Ethernet switch-chip and its LEDs are controlled differently. Ethernet port LEDs on RB951Ui-2HnD are configurable in LEDs menu.
RB951Ui-2HnD has internal Fast Ethernet switch-chip and its LEDs are controlled differently. Ethernet port LEDs on RB951Ui-2HnD are configurable in LEDs menu.
Re: Dissapeared leds in /system leds
You are right. Our engineer set wrong device. In general, there should be RB951Ui-2HnD
I saw a problem when trying to apply the configuration from the RB951Ui-2HnD to RB951Gi-2HnD
Thanks for the answer.
I saw a problem when trying to apply the configuration from the RB951Ui-2HnD to RB951Gi-2HnD
Thanks for the answer.