MikroTik

Posted: **Thu Jul 21, 2016 1:04 pm**

Recently, I discovered that there are only wlan-led and user-led in /system leds. Frimware update 6.35.2->6.35.4->6.36 did not change anything.

> system leds print
Flags: X - disabled, * - default 
 #    TYPE                     INTERFACE                   LEDS                  
 0  * wireless-status          wlan                        wlan-led

MT Led disappeared.png

What can i do to come they back?

Posted: **Thu Jul 21, 2016 2:07 pm**

RB951G-2HnD has had two configurable LEDs (wlan-led and user-led) from beginning. Ethernet port LEDs on RB951G-2HnD are hardcoded in Gigabit Ethernet switch-chip and are non-configurable.
RB951Ui-2HnD has internal Fast Ethernet switch-chip and its LEDs are controlled differently. Ethernet port LEDs on RB951Ui-2HnD are configurable in LEDs menu.

Posted: **Thu Jul 21, 2016 2:22 pm**

You are right. Our engineer set wrong device. In general, there should be RB951Ui-2HnD
I saw a problem when trying to apply the configuration from the RB951Ui-2HnD to RB951Gi-2HnD

Thanks for the answer.

MikroTik

Dissapeared leds in /system leds. Done

Dissapeared leds in /system leds. Done

Re: Dissapeared leds in /system leds

Re: Dissapeared leds in /system leds