Page 1 of 1
wAP / Use the router DHCP?
Posted: Mon Aug 01, 2016 11:19 pm
by ADCAB
Hi,
I have this wAP AC in "home ap dual" but I not need the routing or firewall. I just want my RB3011 to make DHCP and rout like AP WISP mode.
Re: wAP / Use the router DHCP?
Posted: Tue Aug 02, 2016 8:15 pm
by darkprocess
I've used capsman with this setup actually
Re: wAP / Use the router DHCP?
Posted: Tue Aug 02, 2016 9:30 pm
by ADCAB
I have used CAPsMAN but I will test standalone, its only one ap
Re: wAP / Use the router DHCP?
Posted: Sat Aug 06, 2016 8:45 am
by risk
I'm guessing you just ended up bridging wlan1 wlan2 and ether1 and turned of DHCP?
Re: wAP / Use the router DHCP?
Posted: Tue Aug 09, 2016 3:15 pm
by ADCAB
Yes, I don't need the DHCP-server in the wAP. I need the RB3011 as DHCP router. I tried to turn off DHCP in Quick Set, and then the wAP does not work.
Shall I bridge the wAP in some certain way and the turn off DHCP?
Re: wAP / Use the router DHCP?
Posted: Tue Aug 09, 2016 10:32 pm
by darkprocess
Bridge wlan and eth0. Put wlan in ap-bridge. It should work. No firewall rules.
Re: wAP / Use the router DHCP?
Posted: Wed Aug 10, 2016 7:11 pm
by jarda
... There is ether1, not eth0 in ros...
Re: wAP / Use the router DHCP?
Posted: Wed Aug 10, 2016 7:19 pm
by darkprocess
Sorry use ether1
Envoyé de mon SM-G925F en utilisant Tapatalk