MikroTik

When we change port name/alias via www and we apple changes
we still have bad names over snmp.
Always is:
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "Port1"
iso.3.6.1.2.1.2.2.1.2.2 = STRING: "Port2"
iso.3.6.1.2.1.2.2.1.2.3 = STRING: "Port3"
iso.3.6.1.2.1.2.2.1.2.4 = STRING: "Port4"
iso.3.6.1.2.1.2.2.1.2.5 = STRING: "Port5"
iso.3.6.1.2.1.2.2.1.2.6 = STRING: "SFP"

BTW: what about serial number and firmware version available over snmp?

HI!

Unfortunately i dont think its a bug:( Its the coder which didnt replace some part of code somewhere. The port names u get from snmp are probably hardcoded.

FFS mikrotik! Its literally few lines of code, 10 minutes at the most! U know what is to have 40 of them in the network and not be able to read that kinda stuff through snmp?

(dont take me wrong, i like that switch a lot, its cheap and takes a hell of a beating!)

Mikrotik! Please add ifAlias table with user provided interface names to SNMP agent.
Also need SNMP OID for monitoring optical RX power on SFP port.

At least you guys are getting snmp information.

Both of my RB260GSP's stopped giving snmp data. Both show up and I can map the interfaces into cacti but the data just doesn't seem to poll.
**Works fine on all the other devices in my network.