MikroTik

Please Help me..

i use Mikrotik RB1100AHx2 and CRS125-24G1S for Vlan. mikrotik RB1100AHx2 i use to create vlan, routing, firewall rule and Queue. for mikrotik CRS125-24G1S i use to vlan mac address base.
for vlan mac address base goes well but i test speed with tool Iperf vlan 10 ip address 192.168.10.2 to vlan 20 ip address 192.168.20.2 and i was surprised speed only 150Mbps but the NIC mikrotik Mikrotik RB1100AHx2 and CRS125-24G1S already using 1000Mbps.

and i test vlan 10 ip address 192.168.10.2 test speed use tools iperf to same vlan 10 192.168.10.3 and i was surprised speed 985Mbps.

http://wiki.mikrotik.com/wiki/Manual:CRS_examples

anyone can help me......

I think Is Issue, but i do not know issue from hardware or configuration.

anyone please help me.

Please share diagram and config.
The figures/results you shared point to believe that perahps you are pasing trafic across the CPU of CRS125-24G1S...

This is My scheme


This is My CPU Load Mikrotik RB1100


And This is MY CPU Load Mikrotik CRS125


The Vlan base on MAC Address is working. the configuration is working. but speed not work 100% same as speed nic my switch. my nic switch speed is 1000MB . speed vlan only 140Mb
please help mee....