hey guys i have router mikrotik version 6.34 i have block nano m2 in bridge but they still concetd to my wifi but i ask the nano who blocked cielnt can have internet acces or they

Can you post a config? We would need more info to help.

i have bloucked it with bridge like this
[Tab] Completes the command/word. If the input is ambiguous,
a second [Tab] gives possible options

/ Move up to base level
.. Move up one level
/command Use command at the base level

[admin@Crazy.Net] > interface bridge
[admin@Crazy.Net] /interface bridge> print
Flags: X - disabled, R - running
0 R name="out" mtu=auto actual-mtu=1500 l2mtu=1598 arp=enabled
mac-address=4C:5E:0C:F7:5F:BC protocol-mode=rstp priority=0x8000
auto-mac=yes admin-mac=00:00:00:00:00:00 max-message-age=20s
forward-delay=15s transmit-hold-count=6 ageing-time=5m
[admin@Crazy.Net] /interface bridge>
calea host port add disable enable find print set
filter nat settings comment edit export monitor remove
[admin@Crazy.Net] /interface bridge> filter
[admin@Crazy.Net] /interface bridge filter> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=forward action=drop
src-mac-address=68:72:51:2A:52:EC/FF:FF:FF:FF:FF:FF mac-protocol=ip log=no
log-prefix=""

1 chain=forward action=drop mac-protocol=ip src-address=192.168.0.254/32
log=no log-prefix=""

2 chain=input action=drop mac-protocol=ip src-address=192.168.0.254/32 log=no
log-prefix=""

3 chain=forward action=drop
src-mac-address=4C:5E:0C:4D:C1:50/FF:FF:FF:FF:FF:FF mac-protocol=ip log=no
log-prefix=""

4 chain=forward action=drop
src-mac-address=68:72:51:26:5C:A5/FF:FF:FF:FF:FF:FF mac-protocol=ip log=no
log-prefix=""

5 chain=forward action=drop
src-mac-address=68:72:51:3C:C3:73/FF:FF:FF:FF:FF:FF mac-protocol=ip log=no
log-prefix=""

-- [Q quit|D dump|down]

and still have access to my network why

and sorry for bad English