Bridge and queuing of the public IP
Posted: Fri Dec 23, 2016 7:14 pm
Hello all
I'm still learning English, I'm sorry for the mistakes.
I have RB2011U
My configuration:
Configured x3 WAN mangle:
eth10, eth9, eth8 -> WAN interfaces
eth1 - eth5 -> bridge LAN -> VLAN
Here queuing working properly.
eth6, eth7 -> bridge the public (public ip transfer to the computer1 and the computer2)
Internet --- eth6 - (bridge) - eth7 --- switch --- computers
I set a simple queuing for the subnet for example. 72.123.124.240/29, IP computer1 72.123.124.242 and IP computer2 72.123.124.243. Limiting the speed does not work, computers use 100% speed Internet connection.
How can I set the queuing to "transparent bridge" for the public IP addresses?
I'm still learning English, I'm sorry for the mistakes.
I have RB2011U
My configuration:
Configured x3 WAN mangle:
eth10, eth9, eth8 -> WAN interfaces
eth1 - eth5 -> bridge LAN -> VLAN
Here queuing working properly.
eth6, eth7 -> bridge the public (public ip transfer to the computer1 and the computer2)
Internet --- eth6 - (bridge) - eth7 --- switch --- computers
I set a simple queuing for the subnet for example. 72.123.124.240/29, IP computer1 72.123.124.242 and IP computer2 72.123.124.243. Limiting the speed does not work, computers use 100% speed Internet connection.
How can I set the queuing to "transparent bridge" for the public IP addresses?