Page 1 of 1
AP Client
Posted: Tue Oct 24, 2006 3:00 pm
by sioux
Can anyone recommend me a good APC which forward mac addresses and work well with mikrotik?
I've mostly rb112 units with CM9 WISTRON cards.
Posted: Tue Oct 24, 2006 3:00 pm
by normis
and what's wrong with your current solution ?
Posted: Tue Oct 24, 2006 3:15 pm
by sioux
nothing. i don't understand you question.
i'm looking for good AP client to connent to my AP which is Mikrotik running on rb112 + 2xCM9
i want to add few PC behind one AP client unit.
i know that another mikrotik unit would by the best solutions but i'm looking for a cheapper device.
Posted: Tue Oct 24, 2006 3:19 pm
by promind
nothing. i don't understand you question.
i'm looking for good AP client to connent to my AP which is Mikrotik running on rb112 + 2xCM9
i want to add few PC behind one AP client unit.
i know that another mikrotik unit would by the best solutions but i'm looking for a cheapper device.
the ONLY APC 2.4Ghz which I'm aware of forwarding mac addresses is linksys wap54 v2.08/openwrt built on it/. On 5.8 I think CA-804[in WDS] forwards as well.
Posted: Tue Oct 24, 2006 3:26 pm
by normis
actually, the RB112 is a good client, and the RB532 is a good AP. If you use 112 as an AP ... well you could use the same as client too.
Posted: Tue Oct 24, 2006 3:31 pm
by promind
actually, the RB112 is a good client, and the RB532 is a good AP. If you use 112 as an AP ... well you could use the same as client too.
listen to the man
if you are using mikrotik as an AP the best chois for client is also mikrotik
Posted: Tue Oct 24, 2006 3:33 pm
by sioux
i know that another mikrotik unit would by the best solutions but i'm looking for a cheapper device.
hmm. sorry but .. what is wrong with my english?
I think CA-804[in WDS] forwards as well.
maybe i'm wrong but ap-bridge mode and wds stuff exclude each other.
Posted: Tue Oct 24, 2006 3:34 pm
by normis
as this is a mikrotik-only forum, I could tell you about a new (cheap) client device that we will start selling at the end of this year.
Posted: Tue Oct 24, 2006 3:50 pm
by cmit
Then DO tell us about it
Best regards,
Christian Meis
Posted: Tue Oct 24, 2006 3:53 pm
by normis
later
Posted: Tue Oct 24, 2006 4:07 pm
by cmit
Later today?
Best regards,
Christian Meis
Posted: Tue Oct 24, 2006 4:16 pm
by GotNet
At least some specs? How many miniPCI slots? Memory? Price?
At the tone, it is now later.
Posted: Tue Oct 24, 2006 5:50 pm
by cmit
Or:
How much later does it have to be, until it is later?
Best regards,
Christian Meis
Posted: Tue Oct 24, 2006 6:31 pm
by janisk
later - at the end of year, when MT is actyulay starting to sell the item. or im mistaken again?
Posted: Tue Oct 24, 2006 6:46 pm
by cmit
That would be unwise in my opinion.
People (including me) do make decisions now for building future networks. When I do NOT know, what MikroTik will bring out, I (obviously) have to focus on other products.
Maybe I could wait for the product to be available, but if I don't even know WHAT will come, I will have to make a decision for something else...
Best regards,
Christian Meis
Posted: Wed Oct 25, 2006 1:27 am
by savage
But.. You already know what will come, a cheap CPE from Mikrotik?
Posted: Wed Oct 25, 2006 1:58 am
by yogi
as this is a mikrotik-only forum, I could tell you about a new (cheap) client device that we will start selling at the end of this year.
But.. You already know what will come, a cheap CPE from Mikrotik? :D
Cost effective, well priced, affordable, but never cheap!
Posted: Wed Oct 25, 2006 1:30 pm
by balimore
----
hello all,
i did setup, like this for hotspot, dynamic ip, pppoe, and userman as centralized AAA, now running well:
|ISP
|
X86RouterOS
|
|
|AP-Bridge-Omni 15dbi >>>>> AP-Bridge RB511-Flat 19dbi >>>>> AP-Bridge RB511-Flat 19dbi
|
|++ on Omni for some stations in access-list and wds for next AP
|
|++ on second AP for some stations in access-list, wds for next AP and dhcp on ethernet
|
|++ on last AP for some stations in access-list and dhcp on ethernet
Just one question, what's better security for not my-AP will to connect to....?
Thanks for your time..
Hasbullah.com
-----
Posted: Wed Oct 25, 2006 2:06 pm
by normis
you did see those linux journal ads, didn't you? see routerboard.com
Posted: Wed Oct 25, 2006 2:20 pm
by valens
Welcome RB133 and RB133c
Posted: Wed Oct 25, 2006 2:37 pm
by balimore
you did see those linux journal ads, didn't you? see routerboard.com
-----
Hasbullah.com
-----