Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?
Posted: Sun Mar 12, 2017 6:33 pm
by nsb
I have 2 WANs
Ether9-Wan1 with 5mb
Ether10-Wan2 with 10mb
So my total speed will be 15mb.
Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?
Posted: Mon Mar 13, 2017 3:30 pm
by AldoJimenez
I have 2 WANs
Ether9-Wan1 with 5mb
Ether10-Wan2 with 10mb
So my total speed will be 15mb.
Use PCC. Here are a few resources:
https://wiki.mikrotik.com/wiki/How_PCC_works_(beginner)
https://wiki.mikrotik.com/wiki/Manual:PCC
Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?
Posted: Mon Mar 13, 2017 3:58 pm
by nsb
Hi AldoJimenez,
It is a good explanation, But I still don't understand, If I have many VLAN one Ether1, 2, 3, 4 as Bridge-Trunk. As in the example just said only one LAN.
1- How to modify LAN to Many VLAN?
2- Will the PCC work good in of My two WANs?
THANKS
Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?
Posted: Mon Mar 13, 2017 4:12 pm
by erlinden
Please have a look at all the other topics that can be found on the wiki:
https://wiki.mikrotik.com/wiki/Manual:Interface/VLAN
Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?
Posted: Tue Mar 14, 2017 6:10 am
by AldoJimenez
Hi AldoJimenez,
It is a good explanation, But I still don't understand, If I have many VLAN one Ether1, 2, 3, 4 as Bridge-Trunk. As in the example just said only one LAN.
1- How to modify LAN to Many VLAN?
2- Will the PCC work good in of My two WANs?
THANKS
Yes this will work with a multi VLAN setup as long as routing is setup correctly. Search for Multiple WAN Load Balancing with PCC and you will find several walkthrough's for 2, 3 and 4 WANs.