MikroTik

Posted: **Mon May 01, 2017 11:46 am**

Dear Sirs,
I've tried to turn off the LEDs on this routerboard, without success.
If I set as ALL LED OFF IMMEDIATE return the could'nt change led settings erro.
I don't want any LED ON.
Is there something special to do to make this work?
Thanks, BR

/system leds> print
Flags: X - disabled, * - default
# TYPE INTERFACE LEDS
0 * off user-led
user-led
1 off

Posted: **Mon May 01, 2017 12:52 pm**

It's a good question, and one I've been meaning to ask as well.

Also, why is there a difference between the 951G and the 951Ui in terms of LED capability, given these are otherwise so similar?
On the 951Ui:

# may/01/2017 10:45:17 by RouterOS 6.38.5
# software id = XXXX-XXXX
#
/system leds
set 0 disabled=no interface=ether1-master-lan leds=led1 type=interface-status
set 1 disabled=no interface=ether2-slave-lan leds=led2 type=interface-status
set 2 disabled=no interface=ether3-slave-lan leds=led3 type=interface-status
set 3 disabled=no interface=ether4-slave-lan leds=led4 type=interface-status
set 4 disabled=no interface=ether5-slave-lan leds=led5 type=interface-status
set 5 disabled=no interface=wlan1 leds=wlan-led type=interface-status
/system leds setting
set all-leds-off=never

On the 951G:

# may/01/2017 10:48:32 by RouterOS 6.38.5
# software id = XXXX-XXXX
#
/system leds
set 0 disabled=no interface=wlan1 leds=wlan-led type=wireless-status
/system leds setting
set all-leds-off=never

Why can't I control the ethernet port LEDs on the 951G?

Posted: **Thu May 04, 2017 7:56 pm**

What a nice surprise with the update, I can't believe you can turn off by software the LED of a rasbperry pi and not those of the routerboar.
Black tape, will solve the problem?

Posted: **Sun May 31, 2020 6:11 pm**

Some news in this field?

MikroTik

RB951G-2HnD can't turn OFF LED

RB951G-2HnD can't turn OFF LED

Re: RB951G-2HnD can't turn OFF LED

Re: RB951G-2HnD can't turn OFF LED

Re: RB951G-2HnD can't turn OFF LED