Community discussions

MikroTik App
 
june8807
just joined
Topic Author
Posts: 4
Joined: Tue Apr 25, 2017 9:52 pm

HELP with STP on CCR-vrrp-bridge-vlan-(eth1,eth2)---DLINK

Thu May 25, 2017 1:56 pm

Hello All!
Could someone help me with the question!

I have one CCR. It uses as Core Router. On its configuration, I implement vrrp - bridge - vlan - (eth1, eth2) for lan IP and wan IP. This was done to, just I get new CCR, the only I need is to copy CCR1 config to CCR2 config, change some IPs. And, all done.

The troube is, that I got CCR2, restore configuration on CCR1 on it, change some IPs and bridges mac... and my switch (dlink dgs-3200) with RSTP puting the port, that CCR2 connected to "Discarding"...

I hardy can understand why! May be scheme like: vrrp - bridge - vlan - (eth1, eth2) is not good?
or, this work with 6.38.5 and do not work with later version...?

May be some one can help me the direction of bug-tracking... ?