Page 1 of 1

SXT-LTE Memory usage

Posted: Mon May 29, 2017 9:07 pm
by irghost
[amir@MikroTik] /system resource> print 
                   uptime: 2d23h47m13s
                  version: 6.40rc13 (testing)
               build-time: May/25/2017 12:53:01
         factory-software: 6.36.3
              free-memory: 32.7MiB
             total-memory: 64.0MiB
                      cpu: MIPS 24Kc V7.4
                cpu-count: 1
            cpu-frequency: 400MHz
                 cpu-load: 5%
           free-hdd-space: 109.5MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 9815
         write-sect-total: 171365
               bad-blocks: 0%
        architecture-name: mipsbe
               board-name: SXT LTE
                 platform: MikroTik
[amir@MikroTik] /system resource> 
just after 3days

Re: SXT-LTE Memory usage

Posted: Thu Jun 01, 2017 6:37 am
by RogerWilco
[admin@AP] > /system resource print
                   uptime: 1w2d1h10s
                  version: 6.39.1 (stable)
               build-time: May/03/2017 08:17:10
              free-memory: 40.9MiB
             total-memory: 64.0MiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 10%
           free-hdd-space: 111.2MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 13874
         write-sect-total: 176489
               bad-blocks: 0%
        architecture-name: mipsbe
               board-name: RB912UAG-2HPnD
                 platform: MikroTik
After 9 days on RB912UAG with Sierra Wireless MC7304 and WDS link active... I don't think it matters - last time before a reboot was 200+ days and it is always the same. Different hardware, I know, but I don't think you need to worry.

Re: SXT-LTE Memory usage

Posted: Thu Jun 01, 2017 8:12 am
by andlil
Just for comparison
[anders@rtr39] > system resource print 
                   uptime: 4w12h56m40s
                  version: 6.39.1 (stable)
               build-time: May/03/2017 08:17:10
         factory-software: 6.36.3
              free-memory: 38.4MiB
             total-memory: 64.0MiB
                      cpu: MIPS 24Kc V7.4
                cpu-count: 1
            cpu-frequency: 400MHz
                 cpu-load: 13%
           free-hdd-space: 108.6MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 345994
         write-sect-total: 1406133
               bad-blocks: 0%
        architecture-name: mipsbe
               board-name: SXT LTE
                 platform: MikroTik

Re: SXT-LTE Memory usage

Posted: Thu Jun 01, 2017 8:16 am
by irghost
[admin@AP] > /system resource print
                   uptime: 1w2d1h10s
                  version: 6.39.1 (stable)
               build-time: May/03/2017 08:17:10
              free-memory: 40.9MiB
             total-memory: 64.0MiB
                      cpu: MIPS 74Kc V4.12
                cpu-count: 1
            cpu-frequency: 600MHz
                 cpu-load: 10%
           free-hdd-space: 111.2MiB
          total-hdd-space: 128.0MiB
  write-sect-since-reboot: 13874
         write-sect-total: 176489
               bad-blocks: 0%
        architecture-name: mipsbe
               board-name: RB912UAG-2HPnD
                 platform: MikroTik
After 9 days on RB912UAG with Sierra Wireless MC7304 and WDS link active... I don't think it matters - last time before a reboot was 200+ days and it is always the same. Different hardware, I know, but I don't think you need to worry.
im talking about SXT LTE not other routerboards

Re: SXT-LTE Memory usage

Posted: Fri Jun 02, 2017 2:39 am
by RogerWilco
Yes, I know that, hence I said as much. Still useful as a comparison.