SNR question
Posted: Mon Jun 26, 2017 9:55 pm
is there anything wrong with this ?
is there anything wrong with this ?
Page 1 of 1
is there anything wrong with this ?
Re: SNR question
Posted: Mon Jun 26, 2017 11:18 pm
Re: SNR question
Posted: Tue Jun 27, 2017 1:47 pm
basically i hear connection drops but i can't see why it would, stats look good..
Re: SNR question
Posted: Mon Jul 03, 2017 2:41 pm
anyone ?
Re: SNR question
Posted: Mon Jul 03, 2017 3:38 pm
- Try to set wireless protocol to "nv2" at the AP side and to "any" at the station side (I presume that this is point to point link).
- Update ROS to 6.37.5 on both sides (or newer bugfix release).
- Signal levels are "too hot", reduce output power until you get signal level between -40 to -45dBm at both sides.
Regards,
M.
- Update ROS to 6.37.5 on both sides (or newer bugfix release).
- Signal levels are "too hot", reduce output power until you get signal level between -40 to -45dBm at both sides.
Regards,
M.