SNMP for RB2011UiAS configuration help
Posted: Wed Aug 02, 2017 12:44 pm
Hi, can you help me on this..
SNMP settings
enabled: yes
contact:
location:
engine-id:
trap-target:
trap-community: public
trap-version: 1
trap-generators:
SNMP Community
Name: public
Address 0.0.0.0/0
Security: none
Read Access: Yes
Write Access: No
Auth Protocol: MD5
Encryption Protocol: DES
SNMP is not working for Zabbix Monitoring. Please give me tip how snmp to work in router
SNMP settings
enabled: yes
contact:
location:
engine-id:
trap-target:
trap-community: public
trap-version: 1
trap-generators:
SNMP Community
Name: public
Address 0.0.0.0/0
Security: none
Read Access: Yes
Write Access: No
Auth Protocol: MD5
Encryption Protocol: DES
SNMP is not working for Zabbix Monitoring. Please give me tip how snmp to work in router