allow POP and SMTP

CREATIVELINK · Thu Dec 21, 2006 4:39 pm

Dir ,
i need to allow pop and smtp access to all my private network and this is my NAT rules

ip firewall nat> pri
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; SMTP
chain=srcnat src-address=192.168.1.0/24 protocol=tcp src-port=25
action=src-nat to-addresses=194.126.5.134 to-ports=25

1 ;;; POP
chain=srcnat src-address=192.168.1.0/24 protocol=tcp src-port=110
action=src-nat to-addresses=216.147.30.107 to-ports=110

but not working any help please

ferry · Mon Feb 05, 2007 10:39 am

Your information is not clear.I don't understand what u sayin. But the point is : if u want to "allow", nothing rule is needed.

If you want to be helped, please give the clearly information

Thx

mneumark · Mon Feb 05, 2007 11:00 am

NAT isn't what you are looking for, by what i'm getting from you. If you want your network to be able to access your private machines your going to be needing routes.

pinotage · Sat Feb 10, 2007 7:35 pm

Change your rules to dest nat and dest ports

mneumark · Sun Feb 11, 2007 9:40 am

CREATIVELINK,

http://wiki.mikrotik.com/wiki/Redirect_ ... ied_server

Explains how to setup a port forward for a SMTP server. The problem is NAT is normally setup for one ip address.

allow POP and SMTP

allow POP and SMTP

Allow smtp & POP

pop3 and smtp

Who is online